Price List

AVDI diagnostic interface

The set consist of “AVDI diagnostic interface”, PC-Windows based software with general diagnostic functions such as displaying/clearing DTCs, measured values (live data) display, actuator tests and basic coding/configuration functions.

Covered vehicle brands are Audi, Volkswagen, Seat, Skoda, Bentley, BMW, Mini, Porsche, Opel, Vauxhall, Toyota, Lexus, Scion, Mercedes, Smart, Maybach, Renault, Mitsubishi, Hyundai, Kia, Fiat, Alfa, Lancia, Peugeot, Citroen, Chrysler, Jeep, Dodge, Ford, Mazda, Volvo, Daihatsu, Subaru. Set includes PassThru (SAE J2534) compatible driver will allow usage of 3-rd party Hyundai/Kia GDS, GDS2 and Tech2Win – GM/OPEL, Jaguar, Land Rover, Mercedes DAS, BMW, Mini, Volvo, SkiDoo, SeaDoo, CanAm, Fiat Examiner, Toyota, Honda, VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS ….). Additionally you will receive VCI emulator which can allow AVDI to emulate different interface units (like K-line interface, ELM327 interface, ..). Emulation allowing you usage of many additional 3-rd party software’s – Webasto TT, Evinrude Diagnostics, Suzuki/Yamaha Marine Diagnostics and many other.

Initial purchase of AVDI interface includes one year software update of the basic diagnostic suite, tools and our online services and one year free basic support plan (by email only).

Annual Maintenance Subscription 12 month subscription to access the latest software releases and online services

Your initial purchase of the AVDI interface includes a one year access to the latest software updates of the basic diagnostic suite, tools, and our online services. To keep your software applications up to date and to maintain usage of our online services we recommend the Annual Maintenance Subscription. Annual Maintenance Subscription is a renewable one year subscription. Annual Maintenance Subscription does not provide any support coverage - this is provided separately by the Support Plan.

An active AMS is required to purchase additional special functions

Support Plan Service

The Abrites Support Plan Service (SPS) allows the customers to receive support from the Abrites support team. The support team will analyze, detect, determine and provide possible solutions to issues that customers may face while using the Abrites products. 
The SPS works in a written form using an Abrites ticketing platform.  Read more here.

Once the SPS is purchased, an account in the platform is created for each customer where all the problem solving takes place instead of email. 

If the customer is registered with an Abrites partner, the ticket submission will be done by the partner and an individual account will NOT be created for the customer. 

The interval for initial response on behalf of ABRITES is up to 24 hours from case registration during business days. 

The SPS can only be used with active Annual Maintenance Subscription (AMS). The duration of the SPS is 12 months from the date of purchase.

AVDI FULL

Complete set of special functions for the AVDI interface. The current version of the AVDI Full package (v44) includes the following software: BK002, BN011, BN012, BN013, BN014; CR006, DF002, EP001, EP003, EP005; FN013, FN014, FN015, FN021, FN022, FR005, FR008, FR010, HK007, HK010, HK011, JL005, JL006, KT011, KT012, MI007, MN030, MN032, MZ001, MZ002, NN009, ON010, ON013, ON014, PN009, PN017, PN018, PN019, PO006, PO008, PO009, RR011, RR016, RR018, RR019, RR020, RR021, RR022, RR023, RR024; RR025, SB001, TN008, TN009, TN010, TN011, TN012, TN013, TS001, TS002, VL003, VL004, VN002, VN003, VN005, VN006, VN007, VN009, VN012, VN013, VN015, VN017, VN018, VN020

PROTAG Programmer

The PROTAG programmer is a tool intended for operation with keys and transponders used in the latest authentication systems and immobilizers. TA31 Abrites extractor is included in the box. 

PROTAG Programmer v2

The PROTAG programmer v2 is the latest generation tool intended for operation with keys and transponders used in the latest authentication systems and immobilizers and includes a slot for the Mercedes-Benz Actros/Axor IR keys. TA31 Abrites extractor is included in the box. The programmer also is Bluetooth-ready which will allow it to be used without a cable connection in the coming months

ABPROG programmer

The following ICs are supported M35080xx, D080D0WQ, D160D0WQ, SPI 95xxx, I2C 24XXX, Microwire 93XXX, mcu in BCM2 of Audi A4/A5/Q5/A6/A7/A8/ VW Touareg, mcu in BCM of Renault Megane III, Scenic III, Fluence. ABPROG programmer (ZN030) including the ZN031, ZN033 and ZN046 adapters. The ABPROG programmer works with the AVDI interface only.

This package also includes key renewal functionality. Please click HERE to view a full list of the supported key types.

Distribution Box

The Distribution box consists of the following hardware: box with PCB and various sockets, set of cables with pins and fuses, HD15 Direct connection cable, crocodile pins, needle pins and DB25 AVDI connection cable. 

€200

ABRITES RH850/V850 Programmer

This ABRITES Programmer is used for reading data from various vehicle modules with RH850 or V850 locked processors, used in a multitude of automotive brands. The Programmer is used on bench and needs to be soldered to the module, e.g. BCM, Virtual cockpit/Instrument Cluster, Handsfree Module, to connect.

NO TRACE CUTTING REQUIRED!
NO PIN LIFTING REQUIRED!

€550

MODI

The MODI is a bluetooth-enabled device that allows the user to perform complete vehicle diagnostics, guided functions, reset service intervals and many more for a range of brands. The device is compatible with both the MODI app and VINReader app (allowing you to read the VIN numbers when present in the electronic modules of a vehicle). 

VIN Reader

The ABRITES VIN Reader is a standalone device which allows you to read the vehicle’s identification numbers with the click of a button.
This Bluetooth-enabled interface is compatible with nearly all vehicle brands on the market. It allows you to connect to the vehicle and read the VIN numbers in it via the OBDII port.

Battery Support Unit (Charger) - 101.24 CNT

The BSU03 - Battery Support Unit (Charger) - 101.24 CNT is a 100 A high power CONNECTED charger with inverter technology. It allows to keep a 6 V, 12 V and 24 V lead or lithium battery (Lithium-ion "standard" + Lithium-iron Phosphate) at a perfectly stabilized voltage during the diagnostic phases.

VAG Parts Adaptation Special Function

Special function for adapting electronic modules for VAG vehicles

Extracting and displaying immobilizer related data (PIN code, control module configuration memory content, component security data from engine control units) by diagnostic. Ability for alignment of immobilizer related data - cluster/ecu. Displaying immobilizer related data from dump of flash and eeprom of micronas mcu in IPC. Read/Update ConfData in various modules.
Read/Program memory of instrument cluster immobilizer
Read/Update immobilizer related data
NOTE: This function requires internet access

For complete details of the function, please click here.

New AVDI Interface or active AMS is required to purchase this special function.

VAG Key Learning Special Function

Special function for learning keys to VAG vehicles

Preparation of dealer key and key programming for all VAG vehicles (adding a spare key and ALLL KEYS LOST situations) from 2009 to 2018. Does NOT include MQB and MLB vehicles.

For complete details of the function, please click here.

New AVDI Interface or active AMS is required to purchase this special function.

Immo III/IV emulation

The function allows to replace immo-related parts in another vehicle, even when the brand is different or the power class is different.

The function works for the transmissions of Audi A6 2003-2010, Audi Q7 2005-2015, Audi A8 2003-2010,

and for all Immo III/IV engine control units where writing is not permitted. (EDC16/EDC17/ME7/MED9/MED17/Simos benzin/Simos PPD/Simos PCR/Magneti Marelli/Delphi). The function requires internet connection and a complete VN002.

Attention:

The VN005 special function requires VN002 as well as an additional cable set (ZN052) that allows you to start and complete the operation. Each module that is adapted (TCU or ECU) will require an EM003 emulator to be built inside the car.

Immo III/IV Megamos 48 Key Programming

The function allows the programming of keys to ALL VEHICLES with Immo III/IV immobiliser systems and Megamos 48 transponders.

The function works both when there is a working key and in ALL KEYS LOST situations.

A ZN053 AVDI extractor cable IS REQUIRED when purchasing the special function.

The procedure also requires a ZN051 Distribution Box and an internet connection.

Mileage recalibration for MQB vehicles

Mileage recalibration for vehicles based on the MQB platform from 2014 onwards. For a full list of supported models please click here

Active AMS and internet connection are required.

Key programming for MQB vehicles

Key programming for vehicles based on the MQB platform. This includes all models starting from 2012 onwards. 

PROTAG programmer, active AMS and internet connection are required.

Security data extraction for VAG vehicles with Magneti Marelli 9GV ECU

Reading the PIN and Component Security of the Magneti Marelli 9GV ECU. Procedure is done by OBDII with a working key or on the bench (using the ZN051 Distribution Box without opening the ECU) when all keys are lost.

ECU authorization for all Immo 3 and Immo 4 vehicles

Performing authorization (using the ZN051 Distribution Box) of the vehicle ECU in order to update the engine software or to start the vehicle for ALL IMMO 3/IMMO 4 ECUs (Bosch, Siemens/Continental and Magneti Marelli). Allows entering into reflashing mode to update with a SGO/FRF file or to perform an emergency start to the vehicle. 

Odometer recalibration for VAG vehicles 

-Mileage recalibration for Audi A6/A7 (4G) and A8 (D4) and VW Touareg 7P produced from 2010 until 2017 BY OBDII. 
The function works with UDS dashboards.
-Reading and updating internal control module configuration memory by diagnostics. 
Extracting and recalibration security access codes, PIN, component security bytes, current unit mileage values by K-line, CAN bus and UDS. 
-Cluster CAN - With this function you can establish a disgnostic session with the instrument cluster using KWP2000 over TP2.0 or UDS. 
You can Read/Update the odometer values. Supported types are: - VDO/MM/Visteon -2007 (CAN TP2.0)- VDO with NEC μC 2009+ (CAN UDS)- JCI with NEC μC 
and 95320 EEPROM (CAN UDS)- Magneti Marelli with 9S12 μC (CAN UDS)- A8(4H)/A7(4G)/A6(4G)/Touareg(7P) with 95320 EEPROM (CAN UDS)
-Cluster K-Line - With this function you can establish a disgnostic session with the Instrument cluster via K-Line 
(KWP1281 or KWP2000); You can Read/update the odometer value; Read PIN code; Read/Update ConfData; Read ROM/Flash from the Instrument cluster; 
Automatic removing of "DEF error" for Audi A4 instrument cluster BOSCH RB8. Supported types are:- VDO66/86, Motometer- External Immobilizer - LT, 
VW GOL, VW O GOL( Kostal ), Siemens 6 PIN HC05 Immo/TMS- Audi A4 B5 with/without board computer -1997- Audi A6 -1997- Audi A8 -1999- Magneti Marelli - Shadow 1/2/3/Direct- 
VW Sharan/Galaxy -2000- Audi A4 Bosch RBx/RB4/RB4 Crypto/RB8 Crypto 2004+- Golf 4 Bosch RBx- VW Phaeton/Touareg, Bentley Continental, 
Porsche Cayenne- Seat Exeo Bosch RB8 Crypto 2008+- Lamborghini Gallardo -2005/2005+
-Read/Update ConfData (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
-Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8) - Extracting Component security bytes 
(EDC15, ME7.x, VAG-Cartronic ME7.8)- Mileage Calibration (EDC15, EDC16)

COMPONENT PROTECTION MANAGER

Replacement of ALL Component Protection-related modules by OBDII for Audi A6/A7/A8 (4G/4H) and VW Touareg (7P). Reading and updating the component protection bytes of the Lear Gateway, replace dashboards, infotainment, CEM and Climatronic modules.

Advanced diagnostics for VAG vehicles

Completing base settings, long coding helper with ALL descriptions, fully described adaptation channels. configuration change of second-hand modules, enable wireless CarPlay (for vehicles already fitted with CarPlay).

CS MANAGER FOR LOCKED BCM2 MODULES

Reading of Component Security data from locked BCM2 modules for A4/A5/Q5 (2008-2016) and A6/A7/A8/Touareg (2010-2018) models.

MQB Immo Data extraction from RH850 dump

The VN021 license allows extracting the Immobilizer data from dump of RH850 processors, used in VAG MQB dashboards with Megamos-AES keys. This data can then be used for adding a spare key to the vehicle or exchanging the instrument cluster (the latter requires extracting Immo data from both the replacement module, and the donor one).

Special functions set for VAG mileage recalibration VN007, VN015

Full set of mileage recalibration special functions for VAG. 

Special functions set for VAG key programming VN003, VN006, VN009, VN020

Full set of key programming special functions for VAG. The following hardware IS REQUIRED in order to obtain full functionality:

ZN002 PROTAG Programmer

ZN051 Distribution Box

ZN053 AVDI Extractor Cable

CB016 BCM2 Connection cable set

Full VAG special functions set VN002, VN003, VN005, VN006, VN007, VN009, VN012, VN013, VN015, VN017, VN018, VN020, VN021

Full set of special functions for VAG. The following hardware IS REQUIRED in order to obtain full functionality:

ZN002 PROTAG Programmer

ZN051 Distribution Box

ZN052 Abrites cable set for adapting IMMO parts used together with VN005

ZN053 AVDI Extractor Cable

FBS4 instrument cluster calibration

Mileage calibration in the instrument cluster for Mercedes-Benz vehicles with IC213 and IC222. Software synchronisation block between cluster and EZS for IC213. Retrofit of IC213 and IC222

DAS Manager for Mercedes-Benz trucks

Reading EZS password with/without working key. Key programming. Reset (virgin), activation and personalisation of EZS, ECU and TCU modules for all Mercedes-Benz trucks (MP4 platform) with infra-red key

ZN003, ZN075 and TA69 ARE REQUIRED when purchasing the special function.

DAS Manager for FBS3/FBS4 cars

Key programming and module exchange (using both new and second-hand modules) - renewal, personalisation and activation of Electronic Ignition Switch (EIS/EZS), Infra-Red Key, Transmission Control Unit (VGS-NAG2, VGS-NAG3, VGS2-NAG4, VGS-FCVT, VGS-FDCT), Intelligent Servo Module (ISM, DSM), Electronic Steering Lock (ESL/ELV all types!), ESM (for Mercedes-Benz W220) for FBS3 vehicles. Reset of FBS4 Engine control units to virgin state, read the personalization data from a FBS4 ECU and saving it to a file for future use, program personalization data from a previously saved file to a FBS4 ECU, FBS4 ECU Activation

ZN036 IS REQUIRED when purchasing the special function.

FBS4 Electronic Steering Lock Repair

MN033 is dedicated to resolving a problem with the "ELV Component Fault" which is preventing the vehicle from being started and driven. This is a common fault in the Electronic Steering Lock (ESL/ELV) modules. The MN033 enables you to clear the critical error which blocks the vehicle's electronic steering lock.

Full Mercedes-Benz special functions set for passenger vehicles MN030, MN032 and MN033

Full set of special functions for Mercedes-Benz passenger vehicles. Additional hardware is required for key programming

Immobiliser Parts Synchronisation

Perform synchronization/recovery between CAS, EGS and ECU (6-speed gearboxes in E-series vehicles) and adaptation of 8-speed gearboxes in F-series vehicles. Adaptation of BOSCH MG/MD ECUs by DFLASH dump.

Advanced Coding Functionality

Reading and programming vehicle order data, reprogramming flash memory of all electronic control units, E-series unit coding

F-Series and Bikes Manager

Program keys for BMW F-Series,Mini and Rolls Royce vehicles, equipped with CAS4 (by OBDII) or FEM/BDC (by dump).
Reset the mileage in CAS4 or FEM/BDC, virgin (reset) of CAS4 or FEM/BDC, and adaptation of CAS4 or FEM/BDC unit.

Key programming for E-series and F-series (with BDC) by OBDII

Key programming by OBDII for E-series equipped with CAS3 and CAS3+ modules and F-series equipped with BDC modules.

Full BMW special functions set BN011, BN012, BN013 and BN014

Full set of special functions for BMW. ZN002 - PROTAG Programmer is required for key programming

Engine Control Unit Advanced Diagnostic

Reading and updating flash and configuration memory of the ECUs. Clearing IMMO code data

Instrument Cluster Module Recalibration

Reading and updating internal control module configuration memory by diagnostic

Key programming for Renault Talisman/Megane IV/Scenic IV/Espace V and Clio IV/Megane III 2015+

Key programming functionality both for key addition and ALL KEYS LOST situations for Renault Talisman/Megane IV/Scenic IV/Espace V as well as Renault Clio IV/Megane III (MY 2015+).

ALL KEYS LOST key programming for Twingo III/SMART 453

Key programming functionality for ALL KEYS LOST situations for Renault Twingo III and SMART 453

Key programming for Dacia

Key programming functionality both for key addition and ALL KEYS LOST situations for Dacia with Continental BCM. Renault vehicles produced in Brazil also covered.

Key programming for Renault Master III and Kangoo II

Key programming functionality both for key addition and ALL KEYS LOST situations for Renault Master III and Kangoo II.

Special function RR018 is required for the purchase of special function RR021.

Key programming for Renault Clio V and Captur II

Key programming functionality for Renault Clio V and Renault Captur II (working key required)

Special function RR018 is required for the purchase of special function RR022.

Key programming for Dacia Duster III

Key programming functionality for Dacia Duster ph3 (ALL KEYS LOST and spare key).

Special function RR020 is required for the purchase of special function RR023.

Module renewal

Allows module renewal and adaptation of BCM (body control module) and HFM (hands-free module) with a known PIN code, as well as changing the ID of these modules for Renault Clio V/Captur II/New Zoe/Megane IV ph2. This special function also allows clearing of crash data and changing ID of Continental and Veoneer Airbags for Renaul Clio V/Captur II, Dacia Sandero III and others. EPS and UCH renewal is also supported. The function allows you to restore the modules to their factory virgin state and install a used module in a different vehicle.

Mileage calibration for Renault Clio V/Captur II and new Zoë

Allows mileage calibration in all 3 types of instrument clusters for Renault Clio V/Captur II and new Zoë (with needles by dump, digital cluster low-line and digital cluster high-line by OBDII) as well as mileage calibration in the Bosch ABS modules. Instrument cluster and ABS/ESC module exchange are also included.

RENAULT ALL KEYS LOST FROM RH850 DUMP

The RR026 functionality is developed to facilitate the work of the ABRITES RH850/V850 Programmer. This license allows extracting the PIN code by dump from HFM (keyless models) and BCM (non-keyless models) modules to later program keys in All Keys Lost situations for a range of Renault vehicles.

Special functions set for Renault key programming RR018, RR019, RR020, RR021, RR022, RR023, RR026

Full set of key programming special functions for Renault and Dacia vehicles. ZN002 PROTAG Programmer is required in order to obtain full functionality. 

Full Renault special functions set for mileage recalibration RR016 and RR025

Full set of special functions for Renault mileage recalibration.

ABRITES Diagnostics for Peugeot, Citroen

Engine Control Unit Advanced Diagnostic

Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16. Service list update.

BSI, Instrument Cluster Data Manager

Update of Instrument Cluster and BSI working data including support for Delphi UDS BSI 2016+

PIN Manager

PIN code reading and key programming for Peugeot/Citroën vehicles.

Advanced coding configuration

Coding parameter changes in the modules of PSA vehicles including 2021 models.

Full PSA special functions set PN009, PN017, PN018 and PN019

Full set of special functions for PSA.

Instrument Cluster Module Recalibration

Reading and updating internal control module configuration memory by diagnostic.

Key Manager, Advanced Diagnostic Functionality

Key programming functionality , InCode calculator needed for adaptation of new electronic control units (and keys also).

PATS Initialization (2014+)

Initialization of all PATS-related modules in FORD vehicles produced after 2014
Special function FR008 is required for the purchase of this function

Full Ford special functions set FR005, FR008 and FR010

Full set of special functions for Ford.

Key programming for Mazda CX-30 2020+/Mazda 3 2020

Key programming functionality for Mazda CX-30 and Mazda 3 vehicles (2020+). Key addition and ALL KEYS LOST supported. Original keys are required.
Special function FR008 is required for the purchase of this function

PATS Initialization Mazda CX-30 2020+/Mazda 3 2020

PATS Initialization (module adaptation) for Mazda CX-30 and Mazda 3 2020+ vehicles and all other vehicles based on the same platform.
Special function MZ001 is required for the purchase of this function

Full Mazda special functions set MZ001 and MZ002

Full set of special functions for Mazda.

Instrument Cluster/Engine Control Module Recalibration

Reading and updating internal control module configuration memory by diagnostic. Recalibration of control unit working characteristics ( time,mileage).

Advanced Diagnostic Functionality

Coding, configuration, key programming, PIN code calculation.

Module Adaptation

Allows the adaptation of modules both part of the Immobilizer system (Immo V) and those with component protection for Panamera, Cayenne 2011+, 911 991/Boxster 981, Spyder, Macan

Full Porsche special functions set PO006, PO008 and PO009

Full set of special functions for Porsche.

Advanced diagnostic functionality and key programming (incl. mechanical H keys)

Key programming functionality. Immobilizer/Smart system reset by diagnostic. Master key preparation and emulation for all models with mechanical H keys and smart keys. Emergency start in all keys lost situations.

ZN039-2 AND ZN069 ARE REQUIRED when purchasing the special function.

ID Code Box reset

Reset of the ID Code box for ALL Toyota vehicles including the latest generation (2019+) and ID Code Boxes without external EEPROM

Mileage recalibration

Mileage recalibration for Toyota vehicles with VDO/Continental dashboard with microcontroller 70F35xx

Key programming for Lexus 2018+

ALL KEYS LOST and spare key programming for 2018+ Lexus vehicles

CB012 cable and TA68 DST-AES emulator are required in ALL KEYS LOST situations.

Key programming for TOYOTA 2020+ (BA HT-AES)

ALL KEYS LOST and spare key programming for 2020+ Toyota vehicles, equipped with Tokai Rika Smart System and BA type HT-AES keys.

CB012 cable and TA64/TA68 DST-AES emulator are required in ALL KEYS LOST situations.

Key programming for TOYOTA 2020+ (BA DST-AES)

ALL KEYS LOST and spare key programming for 2020+ Toyota vehicles, equipped with Denso Smart System and BA type DST-AES keys.

TA68 DST-AES emulator is required in ALL KEYS LOST situations.

Full Toyota special functions set TN008, TN009, TN010, TN013, TN014, TN015

Full set of special functions for Toyota. ZN002/ZN003- PROTAG Programmer is required for key programming

Instrument Cluster Data Manager

Update of Instrument Cluster working data.

Engine Control Unit Configuration Manager

Reading and Updating ECU's flash/eeprom memory by diagnostic. ECUs supported: MJD 6JF; IAW 4AF,4EF,59F,5AF,5AM,5NF, 5SF3, 5SF8; ME7.3H4/7.3.1 (boot)

FCA Proxi PROGRAMMING

Aligns the vehicle configuration from the BCM to all the other related modules.

PIN and Key Manager for FCA vehicles

Key programming. Transponders/Keys preparation. BCM - Configuration data read and update, PIN, component protection data display. Remote control programming. Includes support for Alfa Romeo Giulia/Stelvio and vehicles with mechanical Megamos AES keys. (FIAT Tipo, Egea, 500X, Toro, Argos, Cronos, Jeep Renegade, Jeep Wrangler) and FIAT vehicles 2021/22 with MOPAR BCM (Alfa Romeo Giulia/Stelvio, Jeep Compass/Renegade, Fiat 500X, Jeep Wrangler/Gladiator, Dodge RAM and others)

Vehicle Module Synchronization

The FN023 allows the adaptation of second-hand modules in Alfa Romeo, Fiat, Jeep, and Lancia vehicles, which are unrelated to the car’s immobilizer (BCM, ECU, RFH). The FN023 is used to change the vehicle identification number of modules, such as distronic, ABS, electric power steering, climate control, and many more.

Full FCA special functions set FN013, FN014, FN015, FN021, FN022 and FN023

Full set of special functions for FCA. ZN002 - PROTAG Programmer is required for key programming

Key Learning for TESLA Model S

ALL KEYS LOST and Adding a spare key by OBDII - ZN087 cable set is required.

TESLA Airbag manager

Read/update airbag data in Bosch airbags (Model 3/X/Y), supports airbag exchange, VIN change and clear crash data. Read EEPROM and clear crash data of Delphi Airbags (Model S)

Full Tesla special functions set TS001 and TS002

Full set of special functions for Tesla

Engine Control Unit Flash Manager

Reading and Updating ECU's flash by diagnostics (OBDII).

PIN and Key Manager

PIN code calculation and key programming functionality, reading and updating of ConfData of ECU, instrument clusters and BCM units.

Advanced Configuration

Calibration of instrument cluster and engine control module data, reset of airbag data (for certain models), extraction of radio PIN code by diagnostics (OBDII).

Full GM special functions set ON010, ON013 and ON14

Full set of special functions for GM

PIN and Key Manager

PIN code calculation and key programming functionality.

Subaru Key learning and smart system reset

Key learning for keyless and mechanical key Subaru cars even when all keys are lost. By OBD, no disassembly needed. Smart system reset is also possible.The function allows you to adapt new and used ECU (ECM) and Smart ECM

PIN and Key Manager

Key programming by diagnostics including Nissan Qashqai J12, Nissan Sentra B18, Nissan Leaf ZE1, Nissan Juke F16 (using 28-digit PIN) and Nissan Micra K14 and Nissan Kicks (using 22 digit PrePIN to 20 digit PIN calculation)

Instrument Cluster, Engine Control Data Manager

Update of Instrument Cluster working data, Flash read/update for ECUs EDC15C2, EDC15C2 configuration memory update.

Advanced module neutralisation

Neutralisation of ECUs on bench without the need of donor vehicle. Neutralisation of smart system, ECU, ESCL and PDM for vehicles with smart keys and immobiliser and SMARTRA module for vehicles with mechanical keys when donor vehicle is present.

PIN and Key Manager

Reading PIN code from working key for all vehicles with Denso IBU. Key programming for all vehicles with smart keys (2018+). PIN code display for vehicles with mechanical keys - Delphi, KEFICO, EDC15/16.

Full Hyundai/Kia special functions set HK007, HK010 and HK011

Full set of special functions for Hyundai/KIA. ZN002 - PROTAG Programmer is required for key programming

Instrument Cluster Data Manager

Update of Instrument Cluster working data.

HITAG 2 Key Learning and Central Car Configuration

Key learning for HITAG 2 PCF7945/7953 type of keys for 2008+ cars

Full Volvo special functions set VL003 and VL004

Full set of special functions for Volvo.

Volvo key programmer

Standalone key programming device

Reduced price for owners of special function VL004.

JLR AKL TOOL

This innovative tool is used to facilitate key programming procedures for JLR vehicles 2020+.
The KP002 is one of the newest ABRITES tools used to help in key programming procedures in AKL situations on the latest JLR vehicles. It can be used by OBDII or on bench to unlock the vehicle's BCM module, making the learning of new keys possible.

Key learning (2018+)

Key programming functionality for JLR vehicles produced after 2018.

Key programming for 2020+ JLR vehicles

Key programming functionality for JLR vehiclesMY20 JLR vehicles such as the Land Rover Defender 2020+, Range Rover Evoque 2020+, Jaguar E-Pace 2020+ and all others based on the same platform.

Full JLR special functions set JL005 and JL006

Full set of special functions for Jaguar/Land Rover. ZN002 - PROTAG Programmer is required for key programming

Instrument Cluster Data Advanced Configuration

Reading and updating configuration memory instrument clusters.

Tag Key Tool

This software will provide you access to the internal memory and configuration of transponders.Available tool for generation of keys by dump of immobilizer system of the vehicle (more than 1000 models are covered).Provided is the ability for preliminary preparation of transponders to be ready for usage with diagnostic equipment.Available functionality for cloning of Megamos 13, Temic 11, Temic 12, Texas 4C, PIT ID33, Tiris 4D, Tiris 4E, Temic 8C (Mazda, Ford, Proton).

Key Inspector

Utility for displaying information from different keys (VIN, last drive, mileage,..).

Bosch EDC17/MED17, Delphi and SIMxx ECU manager

Reading/writing/updating of the Configuration Data (EEPROM), MAP Files, Internal and External Flash of Bosch EDC17/MED17, Delphi and SIMxx by diagnostics (OBDII), on bench (direct connection to ECU) or boot mode.

Click here for a list of supported ECUs

MG/MD ECU, ZF 8HP/VGSNAG/DQ381 TCU Manager

The EP003 license allows the full reading/writing/updating of PFlash, DFlash and Maps, as well as checksum correction of MD/MG Engine Control Units and VGSNAG/ZF 8HP/DQ381Transmission Control Units on bench. 
EP001 required for the activation of EP003.

Click here for a list of supported ECUs

Truck, bike, boat and industrial ECU manager

Reading of ECUs mounted in trucks, motorbikes, boats and industrial vehicles (tractors, agricultural machines) by diagnostics (OBDII).
EP001 required for the activation of EP005.

Click here for a list of supported ECUs

Full ECU Programming package

Full set of special functions for ECU programming. Contains EP001, EP003 and EP005

Advanced bike diagnostics, BMW bikes keyprogramming

Key Programming

Key programming functionality.

ABRITES ESL Emulator for Mercedes

By using the switches on the emulator, you can benefit from a 3-in-1 solution that supports the following models: W203, W204, W207, W208, W209, W210, W211, W212, W169, W245, Vito, Viano and Sprinter. This is a plug and play solution for most models. You can use the ABRITES Software for Mercedes to personalize the emulator (FREE OF CHARGE, NO TOKENS - available for all AVDI owners with valid AMS and special function MN026) or you can personalize the emulator with a green key in the same way as an original ESL (necessary ONLY for W204, W207 and W212).

5 pcs x EM001 - ABRITES ESL Emulator for Mercedes

10 pcs x EM001 - ABRITES ESL Emulator for Mercedes

20 pcs x EM001 - ABRITES ESL Emulator for Mercedes

ABRITES ESL Emulator for Renault

The ABRITES ESL emulator for Renault vehicles (EM002) is one of the most advanced ESL emulators currently available. The ABRITES ESL emulator is part of the all new ABRITES design, manufacturing and development process which allows the whole emulator unit to be designed, developed and produced in-house by us. The currently supported models include Renault Megane II, Megane III, Laguna III, Scenic III, Clio IV and Fluence.

10 pcs x EM002 - ABRITES ESL Emulator for Renault

Immo Parts Emulator for VAG

Used to emulate any IMMO part while emulating using VN005.

10 pcs x EM003 - Immo parts emulator for VAG

ABRITES Video in Motion CAN Filter 125k

The CAN filter allows the unlocking of video playback in a moving vehicle in cases when this option is not available in the diagnostic coding options of the vehicle. This filter works with W166/W292 vehicles with NTG5s1 multimedia module (Panasonic). 

10 pcs x EM004 - ABRITES Video in Motion CAN Filter 125k

ABRITES Video in Motion CAN Filter 500k

The CAN filter allows the unlocking of video playback in a moving vehicle in cases when this option is not available in the diagnostic coding options of the vehicle. This filter works with W221/W216 vehicles with NTG3.5 multimedia module. 

10 pcs x EM005 - ABRITES Video in Motion CAN Filter 500k

Odometer calibration emulator for W204, W205, W212 (FBS3/FBS4)

The odometer calibration emulator allows mileage calibration for W204, W205 and W212 vehicles (both FBS3 AND FBS4).

10 pcs x EM008 - Odometer calibration emulator for W204, W205, W212 (FBS3/FBS4)

Odometer calibration emulator with jumper cable for dash for W204, W205, W212 (FBS3/FBS4)

The odometer calibration emulator allows mileage calibration for W204, W205 and W212 vehicles (both FBS3 AND FBS4) and has jumper cable for the dash for easier installation.

10 pcs x EM009 - Odometer calibration emulator with jumper cable for dash for W204, W205, W212 (FBS3/FBS4)

ABRITES Renault ESL emulator with Clio IV connector

Suitable for Renault vehicles using the Clio IV ESL connector, this ESL emulator allows customers to simply remove the connector from the faulty ESL and plug it in to the emulator. Plug-and-play solution, no software required.

10 pcs x EM010 - ABRITES Renault ESL Emulator with Clio IV connector

ABRITES Renault ESL emulator with Megane IV/Talisman connector

Suitable for Renault vehicles using the Megane IV/Talisman ESL connector, this ESL emulator allows customers to simply remove the connector from the faulty ESL and plug it in to the emulator. Plug-and-play solution, no software required.

10 pcs x EM011 - ABRITES Renault ESL emulator with Megane IV/Talisman connector

ABRITES ESL Emulator for Mercedes-Benz W204/W207/W212 with connector

Suitable for Mercedes-Benz W204/W207/W212, this ESL emulator allows customers to simply remove the connector from the faulty ESL and plug it in to the emulator. Personalisation of the emulator is required.

5 pcs x EM0012 - ABRITES ESL Emulator for Mercedes-Benz W204/W207/W212 with connector

10 pcs x EM0012 - ABRITES ESL Emulator for Mercedes-Benz W204/W207/W212 with connector

20 pcs x EM0012 - ABRITES ESL Emulator for Mercedes-Benz W204/W207/W212 with connector

Odometer calibration emulator for Mercedes-Benz W213

Assisting tool in cases when the mileage recalibration function cannot be applied to all modules, thus blocking the synchronisation between the cluster and the EZS.

10 pcs x EM014 - Odometer calibration emulator for Mercedes-Benz W213

20 pcs x EM014 - Odometer calibration emulator for Mercedes-Benz W213

JLR Ultra Wide Band Emulator

The emulator is used in cases when the vehicle is equipped with an Ultra Wide Band module to give full functionality of the programmed key.

ABRITES Audi BCM2 key in replica shell (868 MHz)

10 pcs x TA44 - ABRITES Audi BCM2 key in replica shell (868 MHz)

ABRITES Audi BCM2 key in replica shell (433 MHz)

10 pcs x TA46 - ABRITES Audi BCM2 key in replica shell (433 MHz)

ABRITES Audi BCM2 key in replica shell (315 MHz)

10 pcs x TA47 - ABRITES Audi BCM2 key in replica shell (315 MHz)

ABRITES keyless key for Audi BCM2 vehicles in replica shell (868 MHz)

10 pcs x TA48 - ABRITES keyless key for Audi BCM2 vehicles in replica shell (868 MHz)

ABRITES keyless key for Audi BCM2 vehicles in replica shell (433 MHz)

10 pcs x TA49 - ABRITES keyless key for Audi BCM2 vehicles in replica shell (433 MHz)

ABRITES keyless key for Audi BCM2 vehicles in replica shell (315 MHz)

10 pcs x TA50 - ABRITES keyless key for Audi BCM2 vehicles in replica shell (315 MHz)

ABRITES Megamos AES emulator

10 pcs x TA51 - ABRITES Megamos AES emulator

Universal BGA key for FBS 3 Mercedes-Benz vehicles (433/315 MHz)

10 pcs x TA52 - Universal BGA key for FBS 3 Mercedes-Benz vehicles (433/315 MHz)

PCB for Mercedes IR key fob case with chrome. Frequency - 315 Mhz

10 pcs x TA21 - PCB for Mercedes IR key fob case with chrome. Frequency - 315 Mhz

PCB for Mercedes IR key fob case small size. Frequency - 433 Mhz

10 pcs x TA13 - PCB for Mercedes IR key fob case small size. Frequency - 433 Mhz

PCB for Mercedes IR key fob case small size. Frequency - 315 Mhz

10 pcs x TA22 - PCB for Mercedes IR key fob case small size. Frequency - 315 Mhz

Abrites KEY for all types Mercedes with IR. Frequency - 433 Mhz

10 pcs x TA14 - Abrites KEY for all types Mercedes with IR. Frequency - 433 Mhz

Abrites KEY for all types Mercedes with IR. Frequency - 315 Mhz

10 pcs x TA15 - Abrites KEY for all types Mercedes with IR. Frequency - 315 Mhz

Abrites Electronic key head with remote control (Renault/Dacia)

10 pcs x TA23 - Abrites Electronic key head with remote control (Renault/Dacia)

Abrites Chrysler/Dodge/Jeep 2013+ Key

10 pcs x TA24 - Abrites Chrysler/Dodge/Jeep 2013+ Key

Megane 3/Laguna 3 key PCB

10 pcs x TA27 - Megane 3/Laguna 3 key PCB

Clio 4/Captur KEYLESS key PCB

10 pcs x TA28 - Clio 4/Captur KEYLESS key PCB

Abrites FIAT 500X KEYLESS key

10 pcs x TA29 - Abrites FIAT 500X KEYLESS key

Abrites extractor

10 pcs x TA31 - Abrites extractor

Abrites Renault Megane 4/Talisman KEYLESS key

10 pcs x TA34 - Abrites Renault Megane 4/Talisman KEYLESS key

Abrites Renault Clio 4/Captur KEYLESS key

10 pcs x TA35 - Abrites Renault Clio 4/Captur KEYLESS key

Abrites DST 40bit/DST+ 80bit Electronic key head

10 pcs x TA36 - Abrites DST 40bit/DST+ 80bit Electronic key head

IC Replacement for Alfa Romeo Giulia/Stelvio

10 pcs x TA38 - IC Replacement for Alfa Romeo Giulia/Stelvio

Renault Megane 4/Talisman keyless key key

10 pcs x TA39 - Renault Megane 4/Talisman keyless key key

ABRITES Alfa Romeo Giulia/Stelvio key

10 pcs x TA40 - ABRITES Alfa Romeo Giulia/Stelvio key

Subaru DST-AES emulator

10 pcs x TA41 - Subaru DST-AES emulator

Abrites key for JLR (433 MHz)

10 pcs x TA54 - Abrites key for JLR (433 MHz)

Abrites key for JLR (315 MHz)

10 pcs x TA56 - Abrites key for JLR (315 MHz)

Volkswagen Touareg keyless key (868 MHz)

10 pcs x TA59 - Volkswagen Touareg keyless key (868 MHz)

Volkswagen Touareg key (868 MHz)

10 pcs x TA60 - Volkswagen Touareg key (868 MHz)

TA64 - ABRITES HITAG-AES EMULATOR

10 pcs x TA64 - ABRITES HITAG-AES EMULATOR

TA65 - ABRITES RENAULT CLIO V KEYLESS KEY

10 pcs x TA65 - ABRITES RENAULT CLIO V KEYLESS KEY

Abrites key for 2018+ JLR vehicles(433 MHz)

Includes support for both 2018-2020 and 2020+ vehicles such as Land Rover Defender, Ranger Rover Sport 2020+, etc.

10 pcs x TA66 - Abrites key for 2018+ JLR vehicles (433 MHz)

Abrites key for 2018+ JLR vehicles(315 MHz)

Includes support for both 2018-2020 and 2020+ vehicles such as Land Rover Defender, Ranger Rover Sport 2020+, etc.

10 pcs x TA67 - Abrites key for 2018+ JLR vehicles (315 MHz)

Abrites DST-AES transponder emulator

10 pcs x TA68 - Abrites DST-AES transponder emulator

Abrites Mercedes-Benz truck IR key

10 pcs x TA69 - Abrites Mercedes-Benz truck IR key

ABPROG EEPROM/BCM adapter

Adapter for ABPROG programmer. It allows programming of EEPROMs – M35xxx/I2C/SPI/MicroWire. This adapter is a part from ABPROG programmer (ZN030).

ABPROG NEC adapter with socket

The adapter is intended for ABPROG programmer ZN030 to be used with NEC MCUs from Mercedes IR-keys.

ABPROG NEC adapter

The adapter is intended to be used with the ABPROG Programmer ZN030 for reading NEC MCUs from Mercedes IR-Keys by soldering the MCU to the adapter.

ABPROG eeprom socket

The socket is used when reading and writing 8-pin EEPROM memories, such as SPI ST M95xxx.

IR AVDI cable

Cable for reading data from EIS through Infra Red

Renault CAN adapter

Adapter for diagnostics of all multimedia modules present in the car (Radio, Navigation, Bluetooth, Telephone, e.t.c)

Fiat/Chrysler CAN adapter

Diagnostics adapter for ABS (Anti Lock Brakes), HALF (Haptical Lane Feedback), ESL ( Electronic Steering Lock), ORC (Occupant Restraint), EPS (Electric Power Steering), PAM (Parking Aid Module) present in Fiat 500x and Jeep Renegade

Toyota Transponder Emulator

Transponder emulator required to complete the key learning/emergency start procedures part of the TN008 special function. You NEED to have TN006 active in order to use the emulator.

A6/A7/A8 CAN Adapter

The Abrites A6/A7/A8 CAN Adapter is used in order to make the ALL KEYS LOST procedure for Audi A6/A7/A8 easier providing all necessary connections.

Abrites Key Renewal Adapter

The Abrites key renewal adapter is a new product which assists when you need to renew a Hitag 2 type of key. It is soldered to the Hitag 2 PCB and it is then attached to the ABPROG programmer in order to renew used HITAG 2 keys.

Abrites Renault key card type field detector

The Abrites Renault key card type field detector has been developed in order to assist when testing to confirm whether or not the electronic ignition switch is functional before starting work. This field detector provides the customer with a reassurance before starting to work on a certain car The ZN047 is activated at 125KHz to confirm the operation of the unit. It indicates that a field is detected by a green light from the LED inside and it is shaped as a Renault key card in order to fit in the key-card slot of modern Renault vehicles.

Abrites universal field detector

The Abrites universal field detector has been developed in order to assist when testing to confirm whether or not the electronic ignition switch is functional before starting work. It detects a field of 125KHz and also a field of 20KHz so that it can be used for multiple brands of vehicles Such as Mercedes, Audi, Toyota and other brands which use these frequencies.

AVDI Adapter for connection with K-Line BMW vehicles (PassThru ONLY)

Adapter used to connect to K-Line BMW vehicles when using OEM software via the AVDI PassThru driver

Abrites cable set for adapting IMMO parts used together with VN005

AVDI Extractor Cable

Extension cable set for direct CAN connection for VAG vehicles

ZN055 - EWS Adapter for ABPROG

ZN062 - 12V/0.5A DC Power adapter IS REQUIRED and is not included in the package

Honda K-Line adapter

EEPROM wire extender for ABPROG EEPROM/BCM adapter

Wire extender for the EEPROM/BCM adapter to be used for reading chips without having to take them off the PCB. 

V850E2 adapter for ABPROG

Adapter used to read the V850E2 single-chip microcontroller using the ABPROG programmer. 

VAG VDO Cluster Adapter

Adapter used to enter service mode for VAG VDO dashboards. ZN063 - 12V/1A DC Power adapter IS REQUIRED and is not included in the package

VAG Micronas (new style connector) Cluster Adapter

Adapter used to enter service mode for VAG Micronas dashboards with the new style connector. ZN063 - 12V/1A DC Power adapter IS REQUIRED and is not included in the package

VAG Micronas (old style connector) Cluster Adapter

Adapter used to enter service mode for VAG Micronas dashboards with the old style connector. ZN063 - 12V/1A DC Power adapter IS REQUIRED and is not included in the package

12V/0.5A DC Power adapter

12V/0.5A DC Power adapter used to give power supply to the ZN055 - EWS3 Adapter for ABPROG

12V/1A DC Power adapter

12V/1A DC Power adapter used to give power supply to the following products:

• ZN059 - VAG VDO Cluster Adapter
• ZN060 - VAG Micronas (new style connector) Cluster Adapter

PWM Voltage converter

The PWM voltage converter is to be used only in cases when reading an ECU on bench requires the PWMs to be powered with 5V, instead of the usual 3.3V. The PWM voltage converter is compatible ONLY with DSBox v. 2.3.

Subaru transponder emulator

Transponder emulator used to emulate the master key in Subaru vehicles. Can be used in ALL Keys Lost situations to program a key or perform an emergency start.

Toyota mechanical key (H-type) adapter set

Set of adapters that is required for the key programming of H-type mechanical keys (DST-AES). Contains ZN067 adapter and ZN068 emulator.

ABRITES BDM Programmer

ABRITES programer that allows the reading of MPC555, 565, 563, 5XX External flash (Micron, Numony, Spansion, ST, etc.), 5XX external eeprom for EDC16 ECUs

ECU Reading set

Set of external power supply, a needle complete with a stand and a pin clip for MCU pins

IR cable for Mercedes-Benz Actros/Axor

Cable for reading data from EIS through Infra Red for Mercedes-Benz trucks (MP4 platform)

Mercedes USB IR Adapter

This infrared adapter set is designed to be used for reading information from the EZS/EIS of Mercedes-Benz vehicles with IR locks.  
The ZN076 offers the whole functionality of the ZN036 but is much easier to connect and use.

V850ES ADAPTER for ABPROG

The ZN078 adapter is the updated version of the ZN034 flat cable, developed and designed by Abrites. It is used in procedures like reading and writing processors which require communication via separate RX/TX lines.

ZF 8HP TCU CONNECTION CABLE

The ZN079 connection cable is used to connect AVDI to ZF 8HP Transmission Control Units for reading and writing FLASH data. The ZN079 cable adapter requires a connection to an external 12V-14V power source via the available DC plug.

BCM2 Solder-Free Connection Set

The ZN080 set is intended for connecting AVDI and ABPROG to BCM2 modules to read and access (unlock) BCM2 modules on bench. This allows key programming procedures to be performed on certain vehicles.

This set does NOT require any soldering, which makes working with these modules much easier.

cable set for Tesla Model S/X/3

Used for diagnostics (alerts), key programming, service functions, airbag exchange/reset procedures and many more!
The ZN087 is a cable set designed, developed and produced by Abrites for working with Tesla vehicles. This set contains two diagnostic cables; one for the Tesla Model X/S (the ZN071 cable) and one for the Model 3 (the CB027 cable).

SAE J1850 adapter for AVDI

Adapter will allow diagnostic operation with SAE J1850 based diagnostic protocols used in the past from Chrysler, Dodge, Jeep, Plymouth, Ford.

AVDI cable for 20 pins round diagnostic connector for BMW

AVDI cable for 38 pins round diagnostic connector for MERCEDES

AVDI cable for 14 pins round diagnostic connector for MERCEDES Sprinter

AVDI cable for instrument cluster Mercedes W203, W209, W211, W219

AVDI cable for Bombardier diagnostic connector

AVDI cable for BMW bike diagnostic connector

AVDI cable for connection with trucks Deutcsh 6 pin (J1708)

ABRITES Mercedes-Benz cable for EZS, 7G Tronic and ISM/DSM

ABRITES cable set for direct CAN-BUS connection

ABRITES MSD/MSV bench connection cable set

ABRITES ENET Cable for BMW vehicles

All keys lost cable for FCA

ABRITES FCA Secure gateway cable

ABRITES Renault-Nissan jumper cable

ABRITES Mercedes Actros jumper cable

Abrites BMW MD/MG ECU Connection Cable

ABRITES Mercedes-Benz MD/MG ECU connection cable

ABRITES EXTENSION CABLE FOR DS BOX RELAY

FBS4/FBS3 ELV Connection Cable

Diagnostic cable for Tesla Model 3

AVDI OBDII cable (SAE J1962)

AVDI extension cable for PROTAG

This cable is a part of PROTAG and ABPROG programmers (ZN002, ZN030)

EXT cable for 25 pin F/M

OBDII Y cable M/2xF

USB A-B Cable

Cable used to connect the AVDI and PROTAG programmer to the computer

AVDI cable for connection with Suzuki Marine Engines type 1

AVDI cable for connection with Suzuki Marine Engines type 2 (round)

AVDI cable for connection with Yamaha Marine Engines

AVDI cable for connection with Evinrude Marine Engines

Evinrude Flash Update cable

AVDI cable for connection with Aprilia Bikes

AVDI cable for connection with KTM Bikes

AVDI cable for connection with Benelli Bikes

AVDI cable for connection with Suzuki Bikes (6 pins)

AVDI cable for connection with Harley Davidson Bikes (CAN/K-Line)

AVDI cable for connection with Piaggio Bikes

Abrites Tough Case - Small size

Abrites Tough Case - Medium size

Abrites Tough Case - Large size