Advanced Diagnostics for McLaren Vehicles
The first Abrites license for McLaren vehicles tone for a new range of functionalities for your AVDI! It is the continuation of our work on supercars, presenting you with even more opportunities to develop your business!
All-Abrites solution for McLaren!
All by OBD!
No third-party tools required!
The ML001 allows you to calibrate various modules and align both vehicle and gateway configuration, as well as perform calibrations and adaptations regarding the TCU/PCCU modules. It also includes multiple guided and coding functions.
Functionalities:
- Gateway configuration change
- Align vehicle configuration
- Guided functions
- VIN change
- Transmission Control Unit (TCU) and Performance Control/Chassis Control Unit (PCCU) calibrations and adaptations
For the full list of functionalities, see Technical Specification tab.
Supported vehicles:
- All McLaren models
All McLaren models
Calibration:
- [CCU] Suspenssion Pressure Sensor Calibration
- [SCML/SMCR] Seat Calibration
- [SAS] Zero Position Steering Wheel (Fine Tuning)
- [ESP] Yaw Rate Sensor Calibration
- [SCUG] Steering Column Calibration
- [DMR/DML]Door Windows Calibration
Diagnostic tests:
- [ECM] Cam Control Diagnostics
- [ECM] Catalytic Converted Diagnostics
- [ECM] Purge System Diagnostics
- [ECM] Throttle Adaptations Clear/Save
- [ECM] Secondary Air Diagnostics
Reset:
- [PCCU/TCU] Gear Adaptations Reset
- [PCCU/TCU] Clutch Adaptations Reset
- [TPMS] TPMS Factory Reset
- [ADI/IC] ADI Default Configuration Restore (and Erase)
Configurations:
- [ADI] Radio Configuration
- [BC] Heated Screen Configuration
- [ESP] Dynamometer Mode Enable
VIN change available for:
- ADI
- BC
- CCU
- CRCM
- ECU
- EISB
- EPHS
- ESP
- FMW
- IBS
- IC
- MCU
- ORC
- PCCU
- PTCU
- PDCU
- SBC
- SCML
- SCUG
- TCU
- TPMS
Engine-related guided functions:
- Catalytic Converter Diag
- Purge System Diagnostic
- Secondary Air Diag
- Cam Control Diagnostics
- DMTL Leakage Test
Engine calibration-type guided functions:
- Throttle Adaptation
- Save Throttle Adaptations
- Clear Misfire Calibration
- Brake Bleed → All models supported
- Carbon Ceramic Matrix (CCM) Front/Rear Disc usage Reset → All models above P13 supported
- Electronic Parking Brake (EPB) Assembly Check → All models supported
- Caliper Usage Reset Front/Back → All models above P13 supported
- EPB Maintenance Mode Enter/Exit → All models supported
- Factory Customer Mode Set → P11 supported
- G Sensor Calibration (EPB) → P11 supported
TCU/PCCU calibrations and adaptations:
- [TCU] Air Brake Bleed
- [TCU] Air Brake Calibration
- [TCU] Calibration
- [TCU] Transmission Warmup
- [TCU] Replacement Reset
- [TCU] Synchro Adaptation
- [TCU] Turbo Wastegate Control
- [TCU] Hydraulic Contamination Cleaning
- [TCU] Clutch1/2 Kisspoint Adaptation
- [TCU] Clutch1/2 Preload Adaptation
- [TCU] Clutch1/2 Pressure Current Adaptation
- [TCU] Clutch1/2 Fill Volume Adaptation
- [TCU] Clutch1/2 Fast Fill Volume Adaptation
- [TCU] Line Pressure Adaptation
- [PCCU] Dual Clutch Calibration
- [PCCU] Hydraulic Contamination Cleaning
- [PCCU] Nose lift Maintenance
- [PCCU] Nose Sensor Lift Calibration
- [PCCU] Clear Gear Adaptations
- [PCCU] Damping Sensor Calibration
- McLaren MP4-12C
- McLaren 540C
- McLaren 570S
- McLaren 600LT
- McLaren 650S
- McLaren 625C
- McLaren 620R
- McLaren 675LT
- McLaren 720S
- McLaren 750S
- McLaren 765LT
- McLaren Elva
- McLaren Senna
- McLaren GT
- McLaren Speedtail
- McLaren P1
- And all variations of the models listed above (Spyder, GTR, etc.)
One-Click Calibrations and Adaptations for McLaren Vehicles via OBD with AVDI and ML001 License!
Configuration and adaptation capabilities of AVDI and the ML001 license for Advanced Diagnostics for McLaren vehicles.
02.04.2026