Key programming functionality for Toyota vehciles, enabling users to perform Immobilizer/Smart system reset by diagnostic, master key preparation by dump of smart system, identification Control Unit reset by LIN bus. Master key emulation supports all models with smart keys. Emergency start is made possible in all keys lost situations.
ZN039-2 AND ZN069 ARE REQUIRED when purchasing the special function.
N.B. Please note that you will require an AVDI interface with an active AMS in order to use this special function. Absolutely no tokens required.
Reset of the ID Code Box available for ALL Toyota vehicles including the latest generation produced after 2018 and for ID Code Boxes without an external EEPROM.
The reset of the ID Code Box opens up many possibilities for those working on Toyota vehicles, mainly due to its location and the long time it takes for the vehicle to be dismantled until the ID Code Box is removed. These include:
Key programming situations - for vehicles manufactured after 2018, where key programming requires a new set comprising an ID Code Box, Smart System and keys, users can use also second hand Smart systems (with available keys) as a plug and play solution once the ID Code Box has been reset.
Smart system defect - in this case, just like in key programming situations all modules would have to be replaced. The reset of the ID Code Box allows you to exchange only the Smart system and the keys and both new and second hand Smart systems can be used (second hand smart...
Special function TN011 is the breakthrough of the ABRITES team with regard to key programming in the latest generation of Toyota vehicles. Pre-order it now at a discounted price and be the first to receive it on 8 November 2021!
Using special function TN011 will allow customers to program keys to Toyota Camry and Toyota Corolla vehicles produced after 2018. Both ALL KEYS LOST and spare key situations are covered by special function TN011. No additional subscriptions (dealer access) are required to complete the key programming procedure.
Depending on the transponder type in the vehicle, either a DST-AES or a HITAG-AES emulator will be required.