ABRITES DIAGNOSTICS FOR RENAULT/DACIA

The ABRITES Diagnostics for Renault/Dacia is an extremely capable tool comparable in functionality to the original testers offered by manufacturers. This online software allows users to use features like module identification, reading and clearing of diagnostic trouble codes (DTCs), display of actual values, and actuator testing with just a few clicks. General diagnostics needs to be regularly updated to support the latest models. See more about the features below.

Module identification is an extremely important and powerful tool while performing basic diagnostics. The ABRITES Diagnostics for Renault/Dacia performs the module identification automatically after choosing the vehicle model.

• Reading and clearing of diagnostic trouble codes (DTCs) includes complete information about the errors in the module as per the available data as well as the ability to clear it.
• Displaying of actual values allows the user to monitor all available parameters reported by the vehicle's sensors hence giving the user the ability to provide a more accurate diagnostic procedure. Various parameters can be observed simultaneously (either numerically or graphically) without limitation to the number.
• Actuator testing is another helpful feature to aid the user to determine where the fault occurs. ALL actuators can be tested separately.
• Advanced – view and edit various configuration parameters
• Scan report - a report containing all modules present in the vehicle and their identification and diagnostic trouble codes, giving you a complete overview of the vehicle.
• IMPORTANT! Key programming for vehicles up to 2014 (including Clio IV) is included in the base software package!

Advanced functionalities, such as key programming for newer models, module replacement and cluster calibration can be accessed with additional licenses.

The ABRITES Diagnostics for Renault/Dacia Online software allows you to program both key cards and mechanical keys effortlessly, even in ALL KEYS LOST situations (except Clio V).
As we mentioned earlier, key programming for vehicles up to 2014 (including Clio IV) is included in the base software package! This means that NO additional license purchases need to be made in order to program keys for the models prior to 2014.
For models manufactured after 2014 up to the latest, including Clio V, Captur II, Megane IV ph2 models, you will require the licenses listed further on this page.
In order to perform the key learning procedure, you may also require ZN002 PROTAG programmer, depending on the model for which you will be programming a key.

With the help of the Abrites software solution for module renewal in Renault vehicles, you can return an already used module to factory state condition ready to be adapted to a new vehicle. It enables you to access the following functionalities:

• Clear crash data in Airbag modules
• Virgin Engine Control Module (ECM) adaptation
• Electronic Power Steering (EPS) Dongle reset
• EPS and UCH renewal and adaptation, which allows resetting these modules to virgin state and use them again in a another vehicle.
• Radio code calculator when replacing the radio unit or disconnecting the battery.

These procedures can be performed on a wide range of models.

This function has been specifically developed to aid our customers to reflash certain modules (DPF removal, chiptuning, Immo OFF) or want to transfer the configuration data from one module to another.

• Reading and writing FLASH
EDC15C3
EDC15C13
EDC17 (can be read/updated if EP001 is active)
SIRIUS32
SID301
SIM32

• Reading and writing ConfData
EDC15C3
EDC15C13
EDC17 (can be read/updated if EP001 is active)
SIRIUS32
SID301
SIM32
SAFIR/SAFIR2/SAFIR200 (reading only)
IAW 6R.20
IAW 6R.30 (reading only)

• Clearing IMMO code data for the following ECUs:
EDC15C3
EDC15C13
SIRIUS32
SID301
SAFIR/SAFIR2/SAFIR200
SIM32
IAW 6R.30

In the Online software this function can be used to recover the module in case of communication break during key programming or mileage recalibration.

This allows the user to recalibrate the mileage in all relevant modules. For some models users can disable the dashboard synchronization with the ABS, recalibrate the mileage in the ABS/ESC (Bosch or ATE). This functionality is useful when performing the following procedures.

• Mileage recalibration
• Dashboard replacement
• ABS/ESC replacement