TA66 - Abrites Key for 2018+ JLR vehicles (433 MHz)

SKU: TA66
€200.00 (Excl. VAT)
TA66 - ABRITES Key for 2018+ JLR vehicles (433 MHz)

The TA66 key for JLR is the latest key developed by Abrites for for Jaguar and Land Rover vehicles, 2018+.
TA66 is programmed directly by OBDII via the corresponding Abrites special function. This key works at 433 MHz frequency.

Key programming by OBDII:

  • Spare key programming
  • ALL KEYS LOST


Supported Models:

  • All Jaguar and Land Rover vehicles 2020+, equipped with K8D2 RFA
  • All Jaguar and Land Rover vehicles 2018+, equipped with JPLA RFA
  • All Jaguar and Land Rover vehicles 2018+ J9C3 RFA
     

Range Rover Evoque 2020+
Jaguar E-Pace 2020+
Jaguar and Land Rover vehicles 2018+, equipped with JPLA or J9C3 RFA
Land Rover Defender 2020+ (AKL when alarm is off)
and all others corresponding models.

In order to program the TA66, you need the AVDI, PROTAG Programmer, and special function JL005 (vehicles 2018-2020) or JL006 (vehicles 2020+).
The CB012 cable will be required for situations when an internal CAN connection is needed - alarm is active and OBDII communication is unavailable.
This product covers the functionalities of the TA57 (2018-2020) and TA62 (2020+) Abrites keys for JLR.
Please, refer to the Abrites Diagnostics for JLR User Manual when performing the procedure.

Jaguar and Land Rover vehicles 2018+

Supported Models:

  • All Jaguar and Land Rover vehicles 2020+, equipped with K8D2 RFA
  • All Jaguar and Land Rover vehicles 2018+, equipped with JPLA RFA
  • All Jaguar and Land Rover vehicles 2018+ J9C3 RFA
     

Range Rover Evoque 2020+
Jaguar E-Pace 2020+
Jaguar and Land Rover vehicles 2018+, equipped with JPLA or J9C3 RFA
Land Rover Defender 2020+ (AKL when alarm is off)
and all others corresponding models.

Frequency: 433 MHz
Dimensions: 9x4x2 cm

Jaguar/Land Rover User Manual

2021 Range Rover Sport All Keys Lost - Key Programming using AVDI and EM015

The ABRITES JLR Ultra Wide Band Emulator is the latest Abrites hardware solution for JLR vehicles. It is used in cases when after successful key programming of TA57/TA58 or TA62/TA63 keys, or rather the new ones which replace them - the TA66 and TA67, only the remote part of the key works and the key does not start the car. The emulator will need to be programmed using the file generated after the successful key programming procedure and once installed in the vehicle, the keys will work as expected. This hardware is used for completing procedures performed with the JL005 or JL006 special functions for JLR vehicles.