![](/img/update.png?v=20240908)
![BN018 - Immo Parts Adaptation (including 8HP Gen3 virgin)]( https://abrites.com/media/cache/sylius_shop_product_thumbnail_clean/b9/c1/f1e91f104e05b3f251c2faa7765c.png
)
BN018 - Immo Parts Adaptation (including 8HP Gen3 virgin)
Requirements | AMS | I18 |
---|
The BN018 is a function dedicated to the adaptation of transmission control units to the EWS (Electronische Wegfahrsperre or electronic immobilizer system), commonly known as EGS (Electronic Gearbox Computer or Elektronische Getriebesteuerung) via OBDII. The ability to synchronize an EGS to a vehicle is used not only when adapting a new or used module to a vehicle, but also in some cases of key programming or replacing other modules which participate in the vehicle's drivetrain or security system. This license also allows the adaptation of Bosch MG/MD ECUs in G-series vehicles by DFlash dump.
Support for setting third generation ZF8HP gearbox modules is included in this license.
Main functionalities:
- ZF8HP (gen3) set to virgin
- ZF6HP EGS adaptation to E-Series vehicles
- ZF8HP EGS adaptation to E-Series vehicles
- (DME/ DDE of the donor car (donor of EGS) or dump from the DME/ DDE (Digitale Motor Elektronik /Digitale Diesel Elektronik) of the donor car is needed in the cases where an 8HP transmission is installed in an E-Series vehicle)
- ZF8HP EGS adaptation to F-Series vehicles
- BOSCH MG/MD adaptation to G-series vehicles (by dump)
Supported models and ECUs:
- All BMW E-Series vehicles
- All BMW F-Series vehicles
- All Bosch MG/MD ECUs in G-Series by DFlash dump
This license contains the full functionality of the legacy BN011 license.
BN012 is required for adaptation of 6-speed gearboxes in E-series vehicles if no working key is present or a ZN003 PROTAG programmer if a working key is present.
An AVDI and active AMS are needed for purchasing this license.
![](/img/update.png?v=20240908)
![](https://i.ytimg.com/vi/T2eUfFeNXw4/hqdefault.jpg?sqp=-oaymwEmCOADEOgC8quKqQMa8AEB-AH-CYAC0AWKAgwIABABGE4gVChlMA8=&rs=AOn4CLBi1PZcxBcKECFU8c9qjWE3x0xahQ)
ZF 8 HP Transmission Control Unit (Gen3) Setting to Virgin State on Bench Using AVDI, ZN074, ZN079
How to set a third-generation ZF 8 HP Transmission Control Unit to virgin state on bench? Easy, using AVDI, ZN074, ZN079, and the BN018 license!