Key learning for All BMW F-Series vehicles (including BDC by OBD) FEM/BDC/CAS4 (v85 included)

BN016 includes key programming for BDC versions 85 or higher by OBDII.
This license allows performing key programming procedures (adding a spare key and ALL KEYS LOST) for BDC/CAS4 F-Series by OBD and FEM, BMW vehicles.

Main functionalities:

• Key programming for F-series vehicles with BDC/CAS4 by OBDII and FEM (85 and higher included)
• Adaptation of BDC modules by OBDII for F-series

Other functionalities:

• Mileage Calibration (dashboard excluded)
• ISN read/write/change

Supported vehicles:

• CAS4 cars: completely via OBDII

7 Series/ 7 Series L- F01,F02
5 Series/ Touring - F10,F11,
6 Series (Coupe/Convertible/ GranCoupe)- F12, F13, F14,
X3/ X4 - F25,F26
CAS4 Rolls Royce: - Ghost, Wraith, Dawn (2009-2016)

• FEM cars

1 Series - F20, F21 (and F52 for the Chinese market)
2 Series - F22, F23, F45, F46, and F87 (M2)
3 Series - F30, F31, F34, F35 and F80 (M3)
4 Series - F32, F33, F36, F82 and F83 (M4)

• BDC cars: completely via OBDII

- BMW X1 (F48)
- BMW X2 (F39)
- BMW X5 (F15)
- BMW X6 (F16)
- MINI Clubman (F54)
- MINI Hatch (F55/F56)
- MINI Convertible (F57)
- MINI Countryman (F60)

In order to perform the key programming procedures, you will need the ZN003 PROTAG. The use of CB015 ENET cable is strongly recommended.
NB: The BN012 license is required for ISN reading of DME/DDE in All Keys Lost situations.
AVDI and active AMS are required to use this license.