Brand-New: Key Programming for the Latest Toyota Models 2025+ (B6 Keys)

We are excited to present to you the new Abrites license for 

Key programming for Toyota models with Tokai Rika or Denso smart systems with B6-type keys

This software allows you to work in All Keys Lost situations, where no working key is available, and also to add a spare key to the vehicle. 

If you need to add a spare key, all is done via OBD and internal CAN-Bus. 
The procedure in AKL situations requires taking the smart system out of the car, disassembling it, and connecting to the PCB using the RH850 Programmer on bench. With the TN023 license, read and save the data from the smart system to a dump file, which later is used to program the new key.

Here’s how it goes:

1.    Take out the smart system and save its data to a file using the RH850 Programmer. (soldering diagrams will be provided in the RH850 Programmer’s software)
2.    Return the smart system in the vehicle and connect to it via the CB012 & CB031 cables (connection diagrams are available in the User Manual for Toyota Vehicles)
3.    Start a key learning procedure via the Abrites software menu for Toyota vehicles
4.    Follow the onscreen instructions, load the dump file with the smart system data, and use the TA64 or TA68 emulator as master key (depending on the smart system type).
5.    When prompted, touch the Start button with the new key.

Requirements: 

• ABRITES Vehicle Diagnostics Interface (AVDI)
• Direct CAN-BUS/LIN-BUS Connection Cable Set (CB012)
• Еxtension Cable for Direct Connecting to Toyota/Lexus Smart System with B9/BA (CB031)
• PROTAG (ZN103)
• TA64/TA68 emulator (depending on the smart system type)
• RH850 Programmer (in All Keys Lost situations) (ZN085)
• Active annual subscription (AMS)