ABRITES Software solutions are among the best aftermarket automotive diagnostics tools a professional can get. Team ABRITES always strives to achieve the impossible, and our products reflect our slogan. ABRITES Software products are designed, developed and created by our dedicated team of professionals to meet the standards of nearly all vehicle brands and offer a solution to every situation.
The ON014 is a special function dedicated to the cluster calibration of Opel/Vauxhall and GM (General Motors) vehicles.
This function allows the reading and updating of the instrument cluster, engine control module and airbag configuration data as well as calculation of the radio PIN code.
List of Supported Models for CAN Calibration:
Chevrolet – Captiva, Cruze
Opel/Vauxhall – Adam, Antara, Astra G, Astra H, Astra J, Corsa C, Corsa D, Insignia, Meriva, Meriva B, Mokka, Movano B, Vectra B, Vectra C/Signum, Zafira, Zafira B, Zafira C
Full list of functionality and supported modules is available in the Vehicle Diagnostics section of our website.
New AVDI Interface or active AMS is required to purchase this special functions.
The single solution for key and remote control programming for Opel/Vauxhall/Buick/Cadillac/Chevrolet/GMC vehicles.
The ON013 special function is unsurpassed when it comes to reading and extracting the PIN codes from Opel/ Vauxhall and other GM cars. This is the list of the supported brands and models:
Buick - Enclave, Encore, GL8 II, LaCrosse, Lucerne, Regal, Verano
Cadillac - ATS, DTS, Escalade 2007, Escalade 2015, SRX 2007, SRX 2010, XT5, XTS
Chevrolet - Avalanche, Camaro, Captiva, Colorado, Corvette 2014, Cruze, Equinox 2007, Equinox 2010, Express, Impala 2006, Impala 2014, Malibu, Orlando, Silverado 2007, Silverado 2014, Sonic, Spark, Suburban 2007, Suburban 2014, Tahoe 2007, Tahoe 2014, Tracker, Trax, Volt.
GMC - Acadia, Canyon, Savana, Sierra 2007, Sierra 2014, Terrain, Yukon 2007, Yukon 2015.
Opel/Vauxhall - Adam, Agila, Agila B, Antara, Astra F, Astra G, Astra H, Astra J, Astra K, Calibra, Corsa B, Corsa C, Corsa D...
MN026 is the current world leader in terms of Mercedes-Benz vehicles module replacement, key and remote programming both for new and used control units for a vast variety of models.
- The modules available for replacement using the MN026 are all DAS related modules or modules related to the Drive Authorization System in Mercedes also known as FBS (Fahr Berechtigungs System). These module include but are not limited to: ECUs, TCUs (7G-Tronic), ISM, DSM, ESL/ EZS, EIS/ ELV. MN026 can read the FBS data from all DAS/FBS related modules and can display it in as many details as possible, it allows you to save this data and modify it or transfer it to a different unit, you can use this function to make each DAS/ FBS module virgin, personalize it, activate it which is the only way to exchange DAS related modules from one car to another. The same applies to DAS/ FBS related modules for coding – you can read the coding, save it and write it from one module to...
The key programming function currently works by utilizing CAN-BUS interface. Keys can be programmed when the pin code of the vehicle is known. The Mitsubishi diagnostics has a database of default pin codes. The pin code can be changed with the Mitsubishi diagnostics. If the pin code is changed - next time when a key is programmed the new pin code should be used.
Currently ALL VEHICLES based on the CAN-BUS protocol (2005+) are supported for key learning, including the latest 2017 models. This includes both key programming with and without a working key (ALL KEYS LOST) as well as the following functionality and manipulations of the Immobilizer module of the vehicles:
- Key registration - for vehicles that use a regular key
- Key registration (simplified) - for vehicles with ALL KEYS LOST or when the PIN Code is unknown
- Remote control registration
- KOS key registration - registration of smart keys for vehicles with Keyless Operation (Immo) Sy...
Key and remote control programming special function for the FORD and Mazda Vehicles, reading PIN codes and incode/ outcode calculations all by OBD (Diagnostic connection). Directly in the vehicle without any dis-assembly. Here are the cars you can expect to work with when purchasing the FR008:
Key programming functionality , InCode calculator needed for adaptation of new electronic control units (and keys also)
Fuel Injection Pump (FIP) Initialization - Bosch VP44 Diesel pump :
Focus I 1.8 TDDi - 1999 - 2001
Connect 1.8 TDDi - 1999 - 2001
Tourneo connect 1.8 TDDi 2003-2004
Transit 2.0 TDDi - 1999-2002
Mondeo 2.0 TDDi - 2000-2003
Mondeo 2.2 TDDi - 2000-2003
Fiesta IV 1.8 TD - 2000-2002
Fiesta Courier IV 1.8 TD - 2000-2002
•INCODE calculator for FORD, MAZDA, JAGUAR, LAND ROVER, MERCURY, LINCOLN
Ford Focus; C-MAX; S-MAX; Fusion; Mondeo; Kuga; Galaxy; Transit; Tourneo Conect; Ka; F...
As with other brands, the FN014 is a special function allowing you to read the flash memory and internal configuration memory by diagnostic connection (OBD) for Fiat/Lancia/Alfa/FCA (FIAT/ CHRYSLER AUTOMOBILES) vehicles. In some cases you need to use BOOT MODE connection in the cases where it is not possible to perform the reading and updating via OBDII. Here is what ECUs it is used for:
Marelli IAW 4AF/4EF/59F/5AF/5NF/6JF IAW 5SF3; BOSCH ME7.3H4/ME7.3.1/ME7.2.1 ( BOOT MODE)
MJD 6JF – IMMO OFF
N.B. Please note that you will require an AVDI interface with an active AMS in order to use this special function. Absolutely no tokens required.
The latest version of the Nissan key programming software now includes support for the key programming for the Nissan Micra K14 and Nissan Kicks vehicles completely by OBDII without needing to know any PIN codes! With our solution, designed to work with vehicles which have a 22 digit PrePIN to 20 digit PIN calculation, you can program both proximity and mechanical keys and you will be able to work both in ALL KEYS LOST situations and also when adding a key is all that is required.
All previously supported vehicles are also supported by this special function. You can see a full list below:
Supported Immobilizer systems:
Immobilizer NATS-2 Siemens - 5WK4593, 5WK4640, 5WK46472, 5WK4825, 5WK48642.
NISSAN MICRA (K11) 1997 year
NISSAN Primera W/P10 1991-1996 year
NISSAN Maxima QX (A32) Schalter V 6 2,0ltr - 1995-2000 year
With the help of this special function you will be able to do module adaptation. This function represents one of the things Abrites is bet known for and is definitely one of the most used functions by our customers. We are always on the front line of adaptation of used and new modules installed in Volkswagen/Audi/Seat/Skoda/Bentley/Lamborghini and even some Porsche vehicles. From the mild to the wild – from sound amplifiers and MMI units to Engine Control Units and Transmission Control Units and everything between. Here is what you can use VN002 for:
- Extracting and displaying immobilizer related data by diagnostic. Ability for alignment of immobilizer related data – cluster/ecu. Displaying immobilizer related data from dump of flash and eeprom of micronas mcu in IPC.
- Read/Program memory of instrument cluster immobilizer
- Read/Update immobilizer related data
- Read/Update immobilizer data in VDO dashboards with NEC microcontroller (2009...
Full VAG special functions set containing the VN002, VN003, VN005, VN006, VN007, VN009, VN012, VN013, and VN015 special functions. The following hardware IS REQUIRED in order to obtain full functionality:
ZN002 PROTAG Programmer
ZN051 Distribution Box
ZN052 Abrites cable set for adapting IMMO parts used together with VN005
ZN053 AVDI Extractor Cable
New AVDI Interface or active AMS is required to purchase this product.
N.B. Please note that you will require a ZN002 PROTAG programmer in order to benefit from the full capabilities of the product.
New AVDI Interface or active AMS is required to purchase these special functions.
With the help of the VN015 you will be able to perform calibrations of the mileage in Volkswagen/Audi/Seat/Skoda/Bentley/Lamborghini and even some Porsche vehicles. It is very helpful when you need to replace a module which contains mileage information about the vehicle you are working on. Here is what you can do using this special function:
- Mileage recalibration for Audi A6/A7 (4G) and A8 (D4) and VW Touareg 7P produced from 2010 until 2017 BY OBDII.
The function works with UDS dashboards.
- Reading and updating internal control module configuration memory by diagnostics.
Extracting and recalibration security access codes, PIN, component security bytes, current unit mileage values by K-line, CAN bus and UDS.
- Cluster CAN - With this function you can establish a disgnostic session with the instrument cluster using KWP2000 over TP2.0 or UDS.
You can Read/Update the odometer values. Supported types are:
One of our flagship special functions, the VN003 is well known for being a world leader in key transponders, PCB and remote control programming for in Volkswagen/Audi/Seat/Skoda/Bentley/Lamborghini and even some Porsche vehicles. VN003 covers cars from the first box immobilizer systems in Golf 3 to the BCM2 types of systems installed in the A4, A5, A6, A7 and A8 cars. Here is what you can use it for
- Extracting and displaying immobilizer related data by diagnostic. Ability for alignment of immobilizer related data – cluster/ecu. Displaying immobilizer related data from dump of flash and eeprom of micronas mcu in IPC
- Read/Program memory of instrument cluster immobilizer
- Read/Update immobilizer related data
- Read/Update immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII
- Extracting and displaying PIN code, control module configuration memory content, component security data from engine control units EDC16, MED9....
Reset of the ID Code Box available for ALL Toyota vehicles including the latest generation produced after 2018 and for ID Code Boxes without an external EEPROM.
The reset of the ID Code Box opens up many possibilities for those working on Toyota vehicles, mainly due to its location and the long time it takes for the vehicle to be dismantled until the ID Code Box is removed. These include:
- Key programming situations - for vehicles manufactured after 2018, where key programming requires a new set comprising an ID Code Box, Smart System and keys, users can use also second hand Smart systems (with available keys) as a plug and play solution once the ID Code Box has been reset.
- Smart system defect - in this case, just like in key programming situations all modules would have to be replaced. The reset of the ID Code Box allows you to exchange only the Smart system and the keys and both new and second hand Smart systems can be used (second hand smart...