"Loading..."
Aftermarket automotive solutions require ingenuity and versatility, as well as perfect connectivity. Abrites LTD. offers a variety of additional cables and adapters, that will help any automotive professional or keen car enthusiast on their way to the perfectly executed task.
Categories
The Adapter will allow special functions operation with SAE J1850 based diagnostic protocols used in the past from Chrysler, Dodge, Jeep, Plymouth, Ford.
Adapter used to connect to K-Line BMW vehicles when using OEM software via the AVDI PassThru driver.
New AVDI Interface or active AMS is required to purchase this product.
Adapter used to enter service mode for VAG Micronas dashboards with the old style connector.
ZN063 - 12V/1A DC Power adapter IS REQUIRED and is not included in the package.
ZN055 - ABPROG EWS3 adapter
€30.00
he Abrites ABPROG EWS3 Reader is an assistance tool designed to allow you to read the EWS3 Dump from the EWS3 cars in order to make a key for them, this tool will be very useful when working on the BMW E46/E53 model cars. The tool attaches to the ABPROG programmer which attaches to the AVDI interface in order to read the EWS3 dump.
Once you have read the EWS3's dump you will be able to save it on your computer. After you do that you will be able to load this dump in the PROTAG software and program a key using it. With the help of the EWS3 Adapter you will no longer need to use third party EWS3 Programmers to read the EWS dump.
As is the norm the Abrites EWS3 adapter comes with the Abrites warranty and the guarantee of our highest quality standards.
*You need an external power supply for the adapter-ZN062 - Power adapter 12V/0.5A DC
This adapter is for the customers who already have ABPROG - ZN030 programmer.
New AVDI Interface or...
The ZN066 is a tool devised to work in Subaru H type bladed (mechanical) keys for Subaru vehicles where all keys are lost. The device is perfect for customers who do not have PROTAG as it connects directly to your AVDI to emulate a master key for Subaru vehicles.
It operates in a manner similar to the Toyota ZN039-2 however due to the specifics of Subaru immobilizers it was developed independently to assist with key programming situations.
The ZN066 can only be used to enter the vehicle into key programming mode and cannot be used as a key.
Adapter used to read the V850E2 single-chip microcontroller using the ABPROG programmer.
12V/1A DC Power adapter used to give power supply to the following products:
- ZN059 - VAG VDO Cluster Adapter
- ZN060 - VAG Micronas (new style connector) Cluster Adapter
ABRITES hardware products are designed to help users in every automotive related task in their everyday work, or keen enthusiasts, when working on their vehicle.
In order to achieve compatibility with a wide variety of vehicle brands, we have developed additional cables and adapters for ABRITES hardware.
ZN065 is an ABRITES connectivity solution, part of our Additional Cables And Adapters range.
The Abrites universal field detector has been developed in order to assist when testing to confirm whether or not the electronic ignition switch is functional before starting work. It detects a field of 125KHz and also a field of 20KHz so that it can be used for multiple brands of vehicles Such as Mercedes, Audi, Toyota and other brands which use these frequencies.
Wire extender for the EEPROM/BCM adapter to be used for reading chips without having to take them off the PCB.
This adapter is for the customers who already have ABPROG - ZN030 programmer.
ZN053 - AVDI Extractor Cable
€50.00
The Abrites Renault key card type field detector has been developed in order to assist when testing to confirm whether or not the electronic ignition switch is functional before starting work. This field detector provides the customer with a reassurance before starting to work on a certain car The ZN047 is activated at 125KHz to confirm the operation of the unit. It indicates that a field is detected by a green light from the LED inside and it is shaped as a Renault key card in order to fit in the key-card slot of modern Renault vehicles.
The ZN072 is a cable set designed, developed and produced by Abrites to be used together with the Abrites Diagnostics for Tesla vehicles. This set contains two diagnostic cables; one for the Tesla Model X/S (the ZN071 cable) and one for the Model 3 (the CB014 cable).
CB014
- The adapter is used for connecting to the CAN-BUS system of the car through the VCL module and the standard OBD2 port
- Compatibility - Model 3 2017-2021
ZN071
- Compatibility - all Tesla X/S (the black connector is used for the old type diagnostic port and the white connector is used for the new type diagnostic port)
Find full information on the correct usage and specific connection to the vehicle in the Abrites Diagnostics for Tesla manual HERE.
Requirements for both cables: AVDI Interface and valid AMS.
Thank you for subcribing to the Abrites newsletter!
Newsletter
Confirm your action
No
Yes
This website uses cookies to ensure you get the best experience on our website
learn more