CB088 - 7G-Tronic VGS2/3/4-0 NAG2 FBS3/FBS4 Direct CAN BUS Connection Cable

SKU: CB088
€30.00 (Excl. VAT)
For working with 7G-Tronic transmission control units, type VGS2/3/4-0 NAG2 on the FBS3/FBS4 platforms via CAN BUS connection.

The CB088 cable is connectivity solution by ABRITES for directly connecting to 7G-Tronic transmission control units VGS2/3/4-0 NAG2 (FBS3/FBS4 generation) via CAN BUS.
This cable connects the TCU with AVDI (ABRITES Vehicle Diagnostic Interface) via a DB25 connector, and to a 12V power supply adapter, required for the procedure, via a DC connector.

Functionality:

  • Connection between VGS2/3/4-0 NAG2 TCUs (FBS3 and FBS4 gen) via CAN BUS


Supported vehicles:
ALL Mercedes vehicles with

  • VGS2 NAG2 TCU
  • VGS3 NAG2 TCU
  • VGS4-0 NAG2* TCU


In order to work with VGS2 NAG2 and VGS3 NAG2 TCUs, an AVDI with basic software and active AMS is required. 12V power supply adapter is also needed.

*For working with VGS4-0 NAG2 TCUs we recommend using the SET088 7G-Tronic VGS4-0 NAG2 FBS4 Solder-Free Connection Set, which contains the CB088 cable for guaranteed success and stable connection. In this case, you also need the MN035 VGS4-NAG2 FBS4 Virgin/Personalization via ABPROG software license.
ABRITES Vehicle Diagnostic Interface (AVDI) with active Annual Maintenance Subscription (AMS) is required to use the full functionality of this product.

 

 

Supported vehicles:
ALL Mercedes vehicles with

  • VGS2 NAG2 TCU
  • VGS3 NAG2 TCU
  • VGS4-0 NAG2* TCU
Easy Work with VGS4-0 NAG2 TCUs Using AVDI and SET088!