The ZN074 set is developed and designed by the Abrites Team to aid you in ECU reading and writing procedures on bench. It is designed to work together with ZN051 Distribution Box and cannot be used individually. The ZN074 works great with the Abrites Engine Control Unit Programming tool and EP00X licenses.
Contents:
- 14V/4A DC Power adapter - used as a charger for ECU, DSBox and AVDI on bench. (EU Plug 110-220V)
- Connecting cable Power Supply -> DSBox (banana plug)
- Boot Test Probe - used for easier connection to the ECU’s Boot pin
- 2-footer probe positioner - used for holding the Boot test probe in place, so that your hands are free
- Micro-Pincer Hook (opening 0.76mm) - used for BGA ball hook up, when the Boot pin of the ECU PCB is not accessible
- Boot probe connection cable (2mm banana plug, len 0,5m) - used for connecting the Boot test probe or the Micro-pincer hook to the DSBox
- 2mm banana socket - used for soldering to the Boot cable, coming from the DSBox, in order to connect the Boot probe connection cable.
It can also be used as a power supply for:
- ZN059 - VAG VDO Cluster Adapter
- ZN060 - VAG Micronas (new style connector) Cluster Adapter
- ZN061 - VAG Micronas (old-style connector) Cluster Adapter
- ZN069 - Toyota mechanical key (H-type) adapter set
- ZN079 - ZF 8HP TCU Connection Cable
- ZN055 - ABPROG EWS3 adapter
If you only need a power supply charger, we recommend you get the ZN082 14V/4A adapter.
AVDI with active annual subscription is required.
The warranty period for this hardware product is 1 year from the date of purchase.
This warranty covers defects in materials and workmanship under normal use during the warranty period.
