Software Versions and Updates Information

 34.9

BN012: fast coding introduced in the license
BN016: Key programming for e-series and f-series fem/bdc (bdc by obdii) v85 and up
BN017: KEY PROGRAMMING, CHASSIS AND ECU ADAPTATION (ID CHANGE)
BN018: IMMO parts adaptation, incl. 8hp tcu (gen3) set to virgin

In the new version of the ABRITES Diagnostics for BMW vehicles online 34.9, we have implemented support for the latest versions. Coding and flashing files are updated to the latest versions.
By updating to the newest version, you will also be able to purchase new licenses for bikes, immobiliser parts synchronisation and key programming. See more below.

BN012: FAST CODING NOW AVAILABLE
The Advanced Coding Functionality license - BN012 now includes the full coding capabilities for BMW vehicles.

BN016: NEW AND UPDATED KEY PROGRAMMING LICENSE
The newest license for key programming for BMW F and E Series is now available in the online shop. All versions, including 85 and higher are supported.

BN017: NEW SOLUTION FOR BMW BIKES KEY PROGRAMMING, CHASSIS AND ECU ADAPTATION (ID CHANGE)
Introducing the new ABRITES software license for BMW motorcycles key programming, chassis and ECU adaptation BN017!
The full ABRITES range of functionalities for BMW bikes will be included in this license after the upcoming update of the ABRITES Diagnostics for BMW vehicles, such as:
- Key programming - All Keys Lost and spare key addition
- Chassis and ECU adaptation (change immobilizer ID in ECU)!  - this functionality is incredibly useful when exchanging the ECU
- Module replacement
- Coding
For the purposes of key programming, the ZN003 PROTAG programmer is required.

BN018: 8HP ZF (3RD GENERATION) TRANSMISSION CONTROL UNITS SET TO VIRGIN!
The latest developments for BMW vehicles by ABRITES is now available with the new BN018 license.
BN018 - Immo Parts Adaptation (including 8HP virgin gen3) license supports the adaptation of Transmission Control Units to the EWS via OBDII, including setting to virgin state 3rd generation ZF 8HP TCUs!
The BN018 offers fast and effective TCU exchange.
BN011 legacy license functionality is included in the BN018.

AVDI with active AMS is required.

34.9

IMMO 4.5 2019+ HAVE NOW BEEN ADDED

The VDO (blue connector) dashboards produced up to 2018 were already supported by OBD if a working key was present and by reading the EEPROM dump if we had no working key. The interesting new feature we add with this version is the ability to read and modify the PFLASH in such a way that we can now use the modifications we have made to complete any task needed:
- Key programming
- Cluster Calibration
- IMMO (dashboard) adaptation

The new addition to the software requires the usage of the ZN085 Abrites RH850/ V850 programmer and allows you to work on a 2021-2022 VDO dashboard as if it was made in 2010.
These upgrades save you time and effort in our strive to create a more convenient and useful solution for the problems you face daily. The popularity of the VAG VDO dashboards is great and many people drive these cars. For the moment this is the easiest possible way to handle them.
The VN002 Parts adaptation license is required.

AVDI with active AMS is required.

34.9

MECHANICAL KEY CLONING AVAILABLE, NO LICENSE REQUIRED!

Mechanical key cloning now available in Abrites diagnostics for Toyota, Lexus, Scion online. With the introduction of version 34.9 you will be able to perform mechanical key cloning for Toyota vehicles directly via the online software, no need to open Tag key tool for any DST-AES and HT-AES key cloning. You can use the Abrites TA68 and TA64 emulators and also you now have the added comfort of just placing as many emulators you need one after the other in the ZN003 PROTAG Programmer to make as many clones as you need. This will save you time and effort!

Also, key learning is improved for Lexus RX, Lexus UX, Toyota Rav4, and Toyota Prius models.

AVDI with active AMS is required.

34.9

MORE models added for mileage calibration

In the new version of the ABRITES Diagnostics for Renault and Dacia vehicles online 34.9 the following is introduced:
- Added mileage recalibration and read/write EEPROM for Renault Kwid instrument cluster via OBD (ABS is already supported via OBD)
- Added mileage recalibration for Megane IV Sedan ph2
- Improved mileage recalibration for Renault Arkana/XM3
- Improved support for UCH Marelli in LoganIII/Sandero III and Jogger

These functionalities are included in the RR029 – Cluster Mileage Calibration for Renault Vehicles (incl. ABS ATE UDS 2020+). AVDI with active AMS is required.

AVDI with active AMS is required.

34.9

MORE SMART FUNCTIONS ADDED IN THE BASIC AVDI SOFTWARE

The latest version of the ABRITES Diagnostics for Mercedes-Benz vehicles online offers more smart functions with the click of a button:

- Airbag write key number
- MRD1 clear crash record
- ABS sync ID with ECU

No additional licenses required! Access all guided functions via the basic AVDI software, simply make sure your AMS is active and you have updated to the latest version of the ABRITES Diagnostics for Mercedes-Benz vehicles.

AVDI with active AMS is required.

34.9

Change VIN in eCall (Telematic) modules in all models which are equipped with them

In online version 34.9 of the ABRITES Diagnostics for Hyundai/KIA vehicles we have added
- Change VIN in eCall (Telematic) modules in all models which are equipped with them
It is a fast, easy and safe way to adapt modules from one vehicle to another in a matter of minutes! It works for new and used modules. In this case, the HK012 KIA/HYUNDAI VIN Calibration license is required to do the job.
Also, in 34.9, you will enjoy an improved vehicle detection procedure upon initialising the ABRITES menu for Hyundai/KIA vehicles.

AVDI with active AMS is required.

41.7

SOFT CLOSE AND GREEN MENU ACTIVATION

Explore the latest features for VAG vehicles in the ABRITES Diagnostics menu (offline)! We've added the activation of soft close and the green menu, achievable in just minutes using AVDI via OBD. These enhancements are part of the basic AVDI software and don't require any additional licenses!

Please note: The soft close functionality can only be enabled in vehicles equipped with the necessary hardware, where the option has been disabled. If the vehicle lacks the required equipment, enabling soft close will not be possible.

Access these features via ABRITES Diagnostics for VAG vehicles (Audi offline), under Special Functions ---> Guided Functions menu. You'll find a list of options to enable or disable. Soft close can be set for each door individually, ensuring it's safe and quick to configure. This feature is available for Audi A6, A7, and A8 models (2010-2018).

The Green Menu can also be accessed through the Guided Functions list, currently located at the bottom. It takes less than a minute to activate or deactivate. Once enabled, you can access it by holding the "Menu" and "Car" buttons in the vehicle. The Green Menu offers a wealth of information, including diagnostic trouble codes (DTCs), navigation details (satellites and coordinates), and much more. This feature is available for Audi A6, A7, and A8 (2010-2018), as well as Volkswagen Touareg (2010-2018) vehicles.

Keep your Annual Maintenance Subscription active to receive all updates to the basic AVDI software and the licenses you already own. Stay tuned for more exciting updates!

AVDI with active AMS is required.

7.3

IMMO V MODULE REPLACEMENT IMPROVEMENTS

With the introduction of version 7.3 you will be able to take advantage of a significant improvement concerning the ability to replace immobilizer related modules for the fifth generation of Porsche vehicles. We have reworked the adaptations of the:

-    Engine Control Modules (DME)
-    Transmission Control Modules
-    Electronic Steering Lock (ELV)
-    Front BCM
-    Rear BCM

Apart from these improvements we have added the ability to manually input the Component Security (CS) bytes of the module you want to adapt. This ability helps a lot when the CS bytes are already known, and you just need to type them in the software in order to complete the adaptation procedure. The improvements made coupled with the ability for manual input completely change the experience of adaptation for the better. IMMO V adaptation in Porsche just became a lot more user friendly and will now limit the margin for error both on the software and the user interface side.
This functionality is added to the PO009 - Module Adaptation license without additional charges.

AVDI with active AMS is required.

KEY PROGRAMMING FOR SUBARU VEHICLES BY DUMP OF RH850 PROCESSOR

With the newest development for Subaru vehicles by ABRITES, you will be able to program keys in All Keys Lost situations for cars with faulty ESL and clone smart keys.
The upcoming new license offers support for vehicles manufactured after 2020, guaranteeing successful key learning procedure!
In order to complete the task, the ZN085 ABRITES RH850 Programmer, AVDI and active AMS are required.

AVDI with active AMS is required.

11.15

HT2 KEYS RUNTIME READING IMPROVEMENTS

The new version of the ABRITES TagKeyTool 11.15 features improvements in the runtime for reading HT2 keys.

AVDI with active AMS is required.

SOFT CLOSE AND GREEN MENU ACTIVATION

Check out the latest functionalities for VAG vehicles in the ABRITES Diagnostics menu (offline)! We have added activation of soft close* and green menu in a matter of minutes, only using AVDI via OBD. These are included in the basic AVDI software and do not require any licenses!

*Please, note that soft close functionality can only be enabled in vehicles which have all the required equipment for it, and the option has been disabled for some reason. If the vehicle does not have the necessary hardware, it will not be possible to enable soft close.

All is accessed via the ABRITES Diagnostics for VAG vehicles (in this case, Audi offline), Special Functions ---> Guided Functions menu. When you open it, you will see a list of options which you can enable or disable. Soft close is set on each door separately, it is perfectly safe for the car, and it is incredibly quick to set up. This is available for Audi A6, A7 and A8 models.

The seriously cool Green Menu can also be accessed through the same Guided Functions list, currently at the bottom of it. It will take you less than a minute to activate or deactivate, and once enabled, it can be reached when holding two buttons in the vehicle ("Menu" and "Car"). In the Green Menu you will find a lot of information, including details on diagnostic trouble codes (DTCs), navigation (satellites and coordinates), and many more! Simply click through it and find out. Green Menu activation is available for Audi A6, A7 and A8 2010-2018, as well as Volkswagen Touareg 2010-2018 vehicles.

Make sure you keep your Annual Maintenance Subscription active to receive all updates to the basic AVDI software and licenses you already own.

AVDI with active AMS is required.

34.8

The latest functionality in terms of Toyota smart system reset is dedicated to vehicles produced for the USA, utilizing the “AA” selective address key. These are vehicles typically produced after 2019 and in compliance to the United States regulations. The unique feature of our offering is that the reset of the smart system is completed exclusively between the Abrites software and the vehicle. This requires no additional accounts or approvals. Using the Abrites solution for the smart system reset requires no TIS or GTS+ account, registration or official management approval and authorization.  The ability to reset the smart system allows you to perform all keys lost procedures without replacing the full set of modules participating in key and access authorization. The current supported key type is “AA” as mentioned above; however, we are currently working on adding the same functionality for the “BA” and “B9” key type smart system for Toyota and Lexus vehicles.

The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.

AVDI with active AMS is required.

34.8

In version 34.8 of the Abrites Diagnostics for VAG we will be able to debut a Kessy dump tool for the VW Touareg, Porsche Cayenne, and Bentley Continental models. As you know adaptation of a used KESSY is not that simple in these models, but the current functionality will allow us to perform modification of the Component Security bytes in the Kessy module, meaning that you will be able to write the CS from the Engine Control Unit directly to the KESSY thus skipping the adaptation steps altogether and adapting solely by CS.
The dump tool requires only AVDI with active AMS.

34.8

In version 34.8  you will be able to see an update to the existing RR024 license. Abrites diagnostics for Renault and Dacia will have the added ability to update the VIN number of the UPC (Universal Power Control) module for all owners of the RR024 license with a valid AMS for their interface. The models we will be able to cover include:
- Clio V
- Captur II
- New Zoe
- Arkana
- Megane IV ph2
- Talisman ph2
- Talisman
- Megane/Scenic IV
- Espace V
- Kadjar
- Koleos II
- other models using the same UPC module

AVDI with active AMS.

2.6

In the latest version of the ABRITES Diagnostics for Mercedes-Benz vehicles offline 2.6, we have introduced new ground-breaking functionalities!
Via the FBS4 Manager menu in the ABRITES Diagnostics for Mercedes-Benz you can access the revolutionary:

•    MN034 FBS4 Personalization Expert
•    MN035 VGS4 NAG2 FBS4 virgin/personalization via ABPROG
These functionalities allow you to set to virgin and personalize FBS4 modules (specific ECUs and TCUs) within minutes.

Read the details below!

MN034 FBS4 PERSONALIZATION EXPERT
The FBS4 Personalization Expert allows personalization of modules from the FBS4 generation of Mercedes DAS (Drive Authorization System). The FBS4 Personalization Expert allows the replacement of electronic components with or without the existence of previously saved personalization data. It is the only tool for the moment which allows the making of FBS4/ DAS4 modules virgin and readapting them from one vehicle to another i.e. reusability of electronic control modules from the DAS system in Mercedes vehicles.
With the MN034 you can:

•    Read personalization data via OBD and on bench
•    Make modules virgin and personalizing them by OBD and on bench
•    Reuse more affordable second-hand modules from one car to another
•    Access personalization data from Mercedes Hybrid modules such as battery controllers
•    48V system controllers such as starter generators
•    Get personalization data from VGS4 NAG2 transmission controller and adapt from one vehicle to another
•    Personalize 8G-DCT transmission controller, make virgin and adapt from one vehicle to another
•    Personalize Engine control units, make virgin and adapt from one vehicle to another
•    Personalize all types of virgin ECUs with previously available personalization data unsupported for bench programming (EMS74, MRD1, MRG1 - year 2021+)
•    Personalize MED177, MED40, CR60LS ECUs when NO PREVIOUSLY PERSONALIZATION DATA IS AVAILABLE!
All owners of the MN032 license (acquired before December 13, 2023) can access the MN034 free of charge. AVDI and AMS are required.

MN035 VGS4 NAG2 FBS4 VIRGIN/PERSONALIZATION VIA ABPROG
MN035 VGS4 NAG2 FBS4 virgin/personalization via ABPROG license is dedicated to working with VGS4NAG2 7G-Tronic TCU of the FBS4/DAS4 generation. It has the following capabilities:
•    Read FBS4 personalization data
•    Set the TCU mechatronic plate to virgin state
•    Write the FBS4 personalization data
•    Personalize the TCU mechatronic plate
ZN030 ABPROG programmer, AVDI, and Active AMS are required!

We have added even more VAG dashboards for support by the ZN085 ABRITES RH850/V850 Programmer and enhanced its capabilities. The new modules and functionalities are as follows:
•    Odometer writing for dashboards equipped with RH850 processors (no cryptocore) – VN021 license is required.

AVDI with active AMS is required.

 34.7

In the latest version of the ABRITES Diagnostics for Renault and Dacia vehicles Online 34.7, we have:
•    Added key learning of keyless Trafic III, NV300, Vivaro (free for owners of RR018)
•    Added mileage recalibration of Duster ph3, Express II, Smart 453 colour, Twingo III Electric and DAB (gateway) mileage reset of NV400/Movano by dump (free for owners of RR028)
•    Improved key learning of keyless Clio V/Captur II/New Zoe/Arkana 2023+ (free for owners of RR022)

AVDI with active AMS is required.

 34.7

In the new version of the ABRITES Diagnostics for Peugeot and Citroen vehicles Online 34.7, we have:
•    Improved key learning of various CAN models (C3 Brazil, C3 Aircross Brazil, P3008)
•    Improved key learning of various UDS models (Vivaro Electric, Traveler, P3008 II, DS7) and added Jeep Avenger
These functionalities are free for owners of the PN018 license.

AVDI with active AMS is required.

 34.7

In the latest version of the ABRITES Diagnostics for Toyota, Lexus and Scion vehicles Online 34.7, we have:
•    Added key learning for Lexus RZ450h (free for owners of TN016)
•    Added key learning for new Toyota CH-R 2023+ (free for owners of TN015)
•    Improved key learning for Lexus UX, Lexus ES, Lexus RX (free for owners of TN016)

There are also additions to the standard diagnostic capabilities, allowing:
•    Reading/Erasing/Writing of DPF/GPF data in ECU
•    Injector compensation in ECU
•    Change ID of ECU
•    Tire pressure sensor adaptation

AVDI with active AMS is required.

  41.6

In the new version of the ABRITES Diagnostics for VAG vehicles offline 41.6, we have:

•    Added support for A1 2015
•    Added suport for 4T0 Lear Gateways (Lamborghini)
•    Added support for some Lear gateways of the 4H/4G generation
•    Reflashing with FRF Files - upgradet functionality - now is possible to reflash with FRF files which includes signatures with RSA+CRC32
•    Improved decryption of some MED17 ECUs with TC1724
•    Immo III/IV - added support for Bentley and Lamborghini Engine Control Unit adaptation
•    JCI NEC + 95320 - improved data decryption

AVDI with active AMS is required.

  34.7

In the latest online version of the ABRITES Diagnostics for VAG vehicles 34.7, we have:
•    Mileage recalibration in DQ200 gearboxes
•    FRF/SGO flasher update
•    Updated guided function like Start/Stop button coding, Seat belt warning, High Beam assists, Display fan speed when on AUTO mode", "High speed warning", "Navigation/Compass in dashboard"
•    Added Dump Tool for EDC17 ECUs

AVDI with active AMS is required.

  9.4

In version 9.4 of the ABRITES Diagnostics for FCA vehicles, we have:
•    Added key programming for Jeep Cherokee 2020+
This functionality is free for all owners of the FN017 license. For all other users, the feature is available to access with active AMS.

AVDI with active AMS is required.

10.1

In version 10.1 of the ABRITES Diagnostics for Mazda vehicles, we have introduced improvements in the key programming procedure for Mazda CX-30 and Mazda 6 models.

AVDI with active AMS is required.

34.7

With the latest update of the ABRITES Diagnostics for VAG vehicles Online, we are introducing a new functionality:
VAG ECU DELPHI DCM6.2 Read Component Security Data (CS) on Bench (requires the VN002 license)
The procedure allows reading the Component Security of ALL Delphi DCM6.2 Engine Control Units in VAG vehicles in a few minutes! You do NOT need to open the module, simply take it out of the car and connect to it using the ZN051 ABRITES Distribution Box. AVDI, active AMS, and the VN002 license are required for reading CS on bench.
In version 34.7 we have also made improvements in the dashboard replacement procedure. The remote-control issue has been cleared and the procedure now runs smoothly.
AVDI with active AMS is required.

34.7

In version 34.7 of the ABRITES Diagnostics for Renault vehicles Online we have added the following:
Added support for mileage recalibration of Calsonic Kansei/Marelli Instrument Cluster (with mechanical pointers) by diagnostics in Clio V/Captur II/Arkana EU (free for all owners of RR025 or RR028 license and active AMS)
Added support for PIN reading and key learning of the latest Continental BCM 2023+ used in Trafic III Ph2, Nissan Primastar II, Dacia Logan III/Sandero III/Jogger (free for owners of RR022 and active AMS)
Added support for VIN change of Calsonic Kansei Air Conditioning in Clio V/Captur II/New Zoe (free for owners of RR024 and active AMS)
Added super fast mileage reacalibration to desired value (not only reset) and EEPROM Read/Write of all types of BOSCH CAN ABS (4,8,16KB EEPROM and 384KB, 1.25MB FLASH) used in various models like Clio IV, Twingo III, Kadjar, Koleos II, Dacia Logan II, Sandero II, Dokker (free for owners of RR016 or RR028 and active AMS)
General diagnostics is updated, allowing you to diagnose the latest models
Added option for recovery of defective Clio V Continental BCMs produced 2020-2021.
AVDI with active AMS is required.

4.5

In version 4.5 of the ABRITES Diagnostics for JLR vehicles, we have
- Added support for key programming for vehicles equipped with the latest BCM versions!
Moreover, now you have the ability to unlock TA54 and TA56 ABRITES keys (as an addition to the previous update, where we added TA66 and TA67).
We have also made improvements in the reading of the secret key from the vehicle’s BCM.
AVDI with active AMS is required.

With the latest update of the designated licenses FR011 and VN021, we have added the following modules for support by the ABRITES RH850/V850 Programmer:
1573 - Ford BCM (requires FR011)
3525(A) - VAG JCI Analogue (requires VN021)
3532 rev2 - VAG JCI Analogue (requires VN021)
AVDI with active AMS is required.

41.5

In the latest version of the ABRITES Diagnostics for Subaru vehicles Online, we have made some improvements in the diagnostic capabilities regarding MY 2016-2022 vehicles.
These include:
- Reading and clearing DTCs
- Customisations
- Live data display
AVDI with active AMS is required.

34.7

The new version of the ABRITES Diagnostics for VAG vehicles we are introducing a brand-new functionality:
VAG Immo III/IV/V authorisation for reflashing
This means that you can now reflash VAG immo III/IV/V modules (ECU/TCU) much more easily and quickly! NO additional licenses required, only AVDI with active AMS!
The new functionality is part of the capabilities of the Basic AVDI software.
It is especially useful when replacing an Engine Control Unit (regardless of Immo generation) with another which has a different Power Class from that of the original.
The procedure used to be longer and more complex, but it is now done in only two steps:
ECU/TCU authorization and  reflashing with original software on bench
Aaptation (adjust ECU/TCU CS)
AVDI with active AMS is required.

9.3

In the new version of the ABRITES Diagnostics for Fiat, Lancia, Alfa Romeo vehicles, we have added the following models for support by the FN022 license:
- Fiat Tipo 2021 Keyless
- Dodge Charger 2021 Keyless
AVDI with active AMS is required.

2.5

In the new version of the ABRITES Diagnostics for Mercedes-Benz trucks, we have added a new functionality:
- Transmission and Clutch calibration
This allows adapting second-hand modules to the following models:
- Mercedes-Benz Actros
- Mercedes-Benz Arocs
- Mercedes-Benz Antos
(and other models from the trucks and buses range with automatic gearbox)

Usually the “kissing point” parameters of the used transmission module carry coding from the donor vehicle, so this can cause difficult gear shifting when the unit is adapted in another one. The calibration procedure is done in a minute and makes sure gear shifting is smooth and seamless after personalizing a used module!
This is inlcuded in the functionalities of the the MN31 DAS Manager for Mercedes-Benz Trucks and Buses license.

AVDI with active AMS is required.

34.7

In the latest version of the ABRITES Diagnostics for Toyota vehicles online, we have made significant improvements in the diagnostic capabilities of your AVDI!
These include:
Live data display - more modules can now be seen
Actuator testing
Read and write coding
Manual choice of vehicle in the application menu (in case there is no Engine Control Unit to identify the vehicle, you can choose the model from a drop-down menu and continue with diagnostics)

AVDI with active AMS is required.

34.7

In the latest version of the ABRITES Diagnostics for PSA vehicles online, we have
Added Speed Limiter adjust/remove for all vehicles with EDC17C10 used in various models like Berlingo, Jumpy, Partner, Expert
This functionality is accessible for all AVDI owners with valid AMS!

AVDI with active AMS is required.

2.4

The best solution for FBS4 module replacement just got better with the new update to the FBS4 manager (MN032) license. New modules added for making virgin, personalization, as well as extraction of current personalization data.
With the upcoming update we provide our customers who currently have the MN032 license and a valid AMS with the ability to perform the following tasks for the control units of the FBS 4 type installed in Mercedes- Benz vehicles. The newly added modules include:
 
•    ECU CRR1(SID307) and CRR1+(SID310) – Done completely by OBD.
•    ECU MRD1, MRG1 (manufactured up to 2021) – Bench connection using ZN051 Distribution box and EP003 are required.
•    ECU CRR2 (MD1CS006) – Bench connection using ZN051 Distribution box and EP003 are required.
•    ECU MED41 (MED17.7.7) – Bench connection using ZN051 Distribution box and EP003 are required.
•    Transmission Control Unit VGSNAG3 (9-Gear) - Bench connection using ZN051 Distribution box and EP003 are required.
•    Transmission Control Unit VGSDCT (Dual Clutch Transmission)- Bench connection using ZN051 Distribution box and EP003 are required.
•    Direct Shift Module (DSM) – ABPROG (ZN030) is required to connect to the module’s microcontroller and read data directly from it to extract the data and use it with the Abrites online software.
 
One of the many benefits of this update is that when adapting transmissions, we do not simply clone them. Instead, we only transfer the necessary data and you do not lose the calibration values which helps you to avoid this tedious process, saving you time and money.
Another important information regarding this update is the fact that the modules above have not been available for renewal before. Up until this update there has been no way to work with used modules and now this will all be available for AVDI customers who have the needed software and hardware.

10.0

In version 10.0 of the ABRITES Diagnostics for Ford, we have now added the ability to program keys to the latest Ford vehicles, manufactured after 2021. Using the new FR011 license and the ZN085 ABRITES RH850/V850 Programmer you can now program keys to the latest Ford models, including the F150 2021+, Maverick 2023+, and Mustang Mach-e 2021+, equipped with RH850 processors.
 
The ground-breaking ZN085 ABRITES RH850/V850 Programmer steps in to help you read information from the RH850 processor and then use it to program keys based on the dump.
AVDI with active AMS and the FR008 license are required to complete the procedure

34.6

In the latest version of the ABRITES Diagnostics for BMW vehicles Online, we have added support for key programming for BDC versions 85 and higher, by OBDII. This is accessible via the new BN015 license.
New BDC versions are supported for key programming by dump of eeprom, as well. As a result, all new BMW models are now supported for key programming by dump (using BN013) and by OBDII (using BN015).
Mileage recalibration can be performed by dump of eeprom, using the BN013 license.
AVDI with active AMS is required.

34.6

Starting with version 34.6 of the ABRITES Diagnostics for Subaru, our team has added key learning smart system reset support for Subaru BRZ 2022+ (and derivative models) as well as other Subaru 2020+ models using a keyless DST AES key.  

The following capabilities are now accessible via the new SB002 license:
- Key registration ALL KEYS LOST and additional key programming. Also programming the key to the ECU.
- Erasing keys (erasing all but the current key)
- Reading number of keys
- Smart system reset and adaptation

AVDI with active AMS is required, as well as the SB001 license.

34.6

With version 34.6 of the ABRITES Diagnostics for Hyundai/KIA vehicles, we introduce the latest ABRITES software license for Hyundai/KIA vehicles – HK012 Hyundai/KIA VIN Calibration, all by OBDII.
The new functionality allows you to set the Vehicle Identification Number of certain modules – Engine Control Unit and dashboard, in a selection of models. This license is developed to save time and resources, allowing you to effortlessly adapt new and second-hand modules for a wide range of vehicles from the group. The HK012 is one of many ABRITES solutions, offering functionalities not available even in the OEM software tools.
The supported vehicles’ list is abundant.
Most nonelectric models with Kefico UDS Engine Control Module (ECM) are supported for VIN calibration. These include, for example, Hyundai i10, i20, i30, and many more to be added soon. Using the HK012 you can easily recalibrate the VIN of the ECM and adapt a used module.
As for the electric vehicles, which are normally equipped with a Vehicle Control Unit (VCU), HK012 offers support for ALL of them, produced so far – Hyundai Kona and Ioniq, and KIA Soul and Niro.
Dashboard VIN calibration is available for models, equipped with digital dashboards, such as the Hyundai Kona, Hyundai Tucson and KIA Niro. More models will be added soon.
AVDI with active AMS is required.

9.2

In version 9.2 of the ABRITES Diagnostics for FCA we have added support for more models for instrument cluster calibration:
•    Jeep Wrangler (JL) 2018+, Jeep Gladiator (JT) 2020+, Maserati Levante, Jeep Grand Cherokee (WK2) 2011-2022, Dodge RAM (DT) 2019+
This is available in the FN013 license via the Offline diagnostics menu under Cluster calibration 2.
The CB019 FCA Secure gateway cable is needed to complete the procedure. AVDI with active AMS is required.

34.6   

In the latest version of the ABRITES Diagnostics for PSA vehicles Online, we have added key learning support for the following 2022-2023 models:
•    Peugeot 3008 II Hybrid, Peugeot Expert, Citroën C5 Aircross
We have also added support for the following 2022-2023 Opel models:
•    Corsa F, Combo E  
This is free for all owners of the PN018 license. AVDI with active AMS is required.

34.6   

In version 34.6 of the ABRITES Diagnostics for Toyota, Lexus, and Scion vehicles Online, we have added general diagnostics capabilities – complete module scan, read/clear DTCs, live data display, for newer models.
Also, we have:
- Added Airbag 2020+ clear crash, and read/write DFLASH
- Added support for Aygo X 2022+, Yaris GR 2021+ , and Corolla GR 2022+ models to the TN014 license
- Added support for Prius WX60 2022+ and BZ4X 2022+ models to the TN015 license
 
And finally, we are happy to introduce the new Lexus license – TN016, offering support for for Lexus RX 2022+, Lexus NX 2021+, Lexus LX 2021+, as well as all the previous models, supported by the legacy TN013 license. The CB012 is needed to complete the procedure. AVDI with active AMS is required.

34.6 

In version 34.6 of the ABRITES Diagnostics for Renault vehicles Online, our team introduces a new license RR027. This license allows you to program keys in ALL KEYS LOST situations and add spare keys to Dacia vehicles, manufactured after 2020 equipped with Marelli UCH. The RR027 is the updated and enriched iteration of the RR023 license and will replace it.
 
Supported models include:
•    Dacia Logan III 2020+ with mechanical key
•    Dacia Sandero III 2020+ with mechanical key
•    Dacia Jogger 2021 with mechanical key
•    Renault Taliant 2020+ with mechanical key
•    Renault Trafic III Ph2 2020+ with mechanical key
 
Keyless vehicles are already supported by the RR022 for spare key, and the RR026 in case of ALL KEYS LOST situations. CB012 or CB021 cable is needed to complete the procedure.
We have also has added support for mileage recalibration of Master III Ph2 2019+ (IC by OBD and DAB by dump). This is free for all owners of the RR016 license.
Coverage of Clio V/Captur II/New Zoe for milеage recalibration, accessible via the RR025 license, is improved.
AVDI with active AMS is required.

4.4

In version 4.4 of the ABRITES Diagnostics for Jaguar and Land Rover vehicles, we have added the possibility of restoring programmed keys.
You can find this option in the Special function menu under “Abrites key restore”. After that, you need to connect the PROTAG programmer, and the software will guide you through the procedure.
AVDI with active AMS, and PROTAG ZN003 are required.

11.12

In the new version of the ABRITES TagKeyTool, we have added support for the following keys in the Key Cloner, accessible without any license via the TagKeyTool menu:
•    HITAG-AES Toyota keys BA/B9 – using the TA64 ABRITES key
•    DST-AES Toyota keys BA/B9 – using the TA68 ABRITES key
 
Also, we have added new capabilities in the Key Inspector (KT011) license:
Reading the following data from BMW G-Series keys:
•    VIN (current/initial)
•    Odometer
•    Last drive
•    Fuel
•    Battery voltage
•    Shipping
•    Temperature (coolant/outside)
•    Color code
•    Upholstery code
•    Remote frequency
•    Display key/ no display
 
Reading the following data from Audi A6/A7/A8 BCM2 keys (keyless):
•    Odometer
•    Hardware/software version
•    Key date of production

Support for production of SsangYong keys by dump of 29f40 memory, is added, as well, no license needed. AVDI with active AMS is required.

34.6 

In the new version of the ABRITES Diagnostics for VAG vehicles Online, we have added VIN customisation in the Immo V adaptation procedure. You are now able to enter a custom vehicle identification number when performing module adaptation.
Also, in the Immo V adaptation menu you will see two new checkboxes: Keyless and Electric vehicles. Make sure you tick them off when working with keyless, and/or EVs.
This is accessible with the VN002 license. AVDI with active AMS is required.

34.6 

In the latest version of the ABRITES Diagnostics for Porsche vehicles Online, we have added a new functionality in the Dump tool:
•    Reading mileage and moto hours from dump of ME7.xx eeprom ECUs
This is accessible with the PO009 license under the Dump tool menu AVDI with active AMS is required.

Updating to the latest ABRITES software version will give you access to the functionalities, included in the ABRITES V850/RH850 Programmer.

Using the new VN021 license, you can add a spare key or exchange the instrument cluster of VAG MQB vehicles with Megamos-AES keys (requires Immo data from both the donor, and the replacement modules). This is possible by extracting various Immo data by dump of RH850 processors, such as Component Security bytes, MAC address, Keys info, and PowerClass of the vehicle.

AVDI with active AMS is required.

34.5

In the latest online version of the ABRITES Diagnosics for BMW vehicles, we are introducing new functionalities for the latest models of BMW bikes:

- Added support for more software versions, key programming capabilities for keyless models and module replacement for Immobilizer modules (EWS4 and hands-free module (HUF)).

Also, the procedure via the EWS Manager in the BMW online software is now improved and more intuitive.

These functionalities are accessible using he BN013 license. AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for Toyota vehicles, we are introducing new key programming functionalities for the latest models.
Using the TN014 license, you can program keys in All Keys Lost situation or add spare keys for models, manufactured after 2020, equipped with Tokai Rika Smart Systems and BA type HT-AES keys.

Supported models:
•    Yaris 2020+ (XP210)
•    Yaris Cross 2021+ (XP210)
•    Corolla Facelift 2022+ (E210)
•    Corolla Cross Facelift 2022+ (XG10)

Including the models, already supported in the TN011 legacy license:
•    Corolla 2018+ AA HT-AES
•    Camry 2018+ A9 DST-AES
•    Highlander 2018+ AA DST-AES
•    Mirai 2020+ AA DST-AES
 
Using the TN015 license, you are now able to program keys in All Keys Lost situation or add spare keys for models, manufactured after 2020, equipped with Denso Smart Systems and BA type DST-AES keys.

Supported models:
•    Sienna 2020+ (XL40)
•    Harrier/Venza 2020+ (XU80)
•    Tundra 2021+ (XK70)
•    Land Cruiser 2021+ (J300)
•    RAV4 Facelift 2022+ (XA50)
 
Including the models, already supported by the TN012 legacy license:
•    CH-R 2018+ A9 DST-AES
•    Prius 2018+ A9 DST-AES
•    Avalon 2018+ AA DST-AES
•    RAV4 2018+ AA DST-AES
 
We have also Improved the support for Australian models, included for free in the functionalities of the TN014 and TN015 licenses.
Keep in mind, that an AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for Renault vehicles online, we have added support for more models, as follows:
-    New Clio V/Captur II/New Zoe versions for mileage recalibration
This functionality is accessible for free for all owners of the RR025 license.

We have also added:
-    Edit config/save to file/restore from file of the newer models in the basic diagnostics.

AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for Nissan vehicles online, we have added a new functionality:

-    Key learning of the new models with 4-digit PIN with UDS Еngine Control Unit (for example, NT500)  

This is accessible for free for all owners of the NN009 license. AVDI with active AMS is required.

34.5

In the latest version of the ABRITES Diagnosics for PSA and Opel vehicles online, we have added support for the following 2022 models:

-    Citroën C5 Aircross
-    Peugeot 508 II
-    Peugeot 5008 II
-    Peugeot Rifter
-    Opel Vivaro
-    Opel Grandland

This functionality is free for all owners of PN018 license. AVDI with active AMS is required.

34.5

In the latest online version of the ABRITES Diagnosics for VAG vehicles, we have added support for more Simos Continental ECUs for reading CS by bench.

The supported Simos ECUs include:
•    Simos 10.22/10.24
•    Simos 12.2
•    Simos 16.11
•    Simos 18.1/18.2/18.3/18.6/18.10

Furthermore, now Component Security bytes can be extracted by dump of Simos xx.xx ECUs. If you have an available dump file, you will be able to read CS using the Dump tool functionality from the VAG Online software menu.
AVDI with active AMS is required.

34.5

In the latest online version of the ABRITES Diagnosics for Jaguar and Land Rover vehicles, we have improved the key programming procedure for all 2018+ models (using the TA66 key).

11.11

The latest functionality added in the ABRITES TagKeyTool version 11.11 is in regard to BMW bikes. Using the KT011 - Key Inspector license, you can now read the following data from keyless DST-AES keys for these bikes:

•    Production date
•    Place of production (factory number)
•    VIN of key

In order read this information from the key, you will need the PROTAG Programmer (ZN003), in which you need to place the key for the procedure.
Also, AVDI interface is required, in order to access the software

11.11

In version 11.11 of the ABRITES Diagnosics for Mercedes-Benz vehicles, we have improved the EZS/EIS password extraction, personalization, and virginisation procedures.

It can be done using either the ZN036 IR adapter (ABPROG) or the latest ZN076 USB IR adapter. The new adapter makes the procedure significantly faster to perform. Using the ZN076 you will also be able to emulate IR keys.

This functionality is accessible via the MN032 DAS Manager license. AVDI with active AMS is required.

34.3

With version 34.3 the ABRITES Diagnostics for FCA vehicles is now online!
With the this version of the software, we are also releasing a brand-new license – the FN023 – Vehicle Module Synchronization.
Using the FN023, you can synchronize the vehicle identification number of modules, unrelated to the immobilizer. It is an easy and risk-free procedure for exchanging second-hand modules, such as ABS, distronic, electric power steering, and many more.

With this update, we have also added a new functionality for coding and configuration change in FCA vehicles for the US market - Jeep Wrangler, Gladiator, Grand Cherokee, Dodge RAM, Charger, Challenger, and more models. It is available to all FN021 owners, who update to the latest software version.

AVDI with active AMS is required.

34.3

In the ABRITES Diagnostics for VAG Online 34.3 we have added new functionalities.

- IMMO OFF for DQ200 and DQ250 Transmission Control Units;
- Checksum correction of Program Flash in Simos 8, Simos 10, Simos 12, Simos 16, Simos 18, Simos 18.1, Simos 18.2 Engine Control Units;
- Component Security bytes extraction by Dump from Simos 10.12, Simos 12.1, Simos 12.2, Simos 18.1 Engine Control Units;

AVDI with active AMS is required.

34.3

In the latest update of the ABRITES Diagnostics for Porsche Online we have added Dump Tool functionality.
It allows Component Security bytes extraction from Simos SDI 10.2 and Simos SDI 7 Engine Control Units. AVDI with active AMS is required.

34.3

In this version of the software, the latest functionality for resetting used keys to new is included!
With version 34.3 and the HK011 license, you can reset to new keys, programmed to Hyundai/KIA vehicles with HITAG 3, HITAG AES, DST AES, and DST 80 transponders.

AVDI with active AMS is required.

34.3

In version 34.3 the speed limit calibration functionality is made available in the basic software.

Update to the latest version of the ABRITES Diagnostics for Mercedes-Benz Online and you will be able to set the speed limit of vehicles with CEPC 253, for example the Mercedes-Benz eVito vans.
Via the Special Functions menu in the ABRITES Diagnostics for Mercedes-Benz vehicles, you can set the speed limit choosing from a dropdown menu of preset values.

This functionality is available to all AVDI users with active AMS as a part of the basic AVDI software for Mercedes-Benz.

AVDI with active AMS is required.

TAGKEYTOOL

11.11

In the latest update of the ABRITES TagKey Tool we have made a few improvements in overall user experience.
All PROTAG owners with the latest version will be able to enjoy better flowing key-related procedures.

AVDI with active AMS is required.

8.9

With version of 8.9 the ABRITES Diagnostics for FCA vehicles you are now able to prepare transponders for Fiat Ducato, Iveco Daily and Fiat 500L, manufactured after 2020. You need to read the external EEPROM from the BCM module using the ABPROG Programmer, then load the file in the Transponder Maker to prepare a key. The prepared key can then be programmed via the Key Learning menu. This functionality is available for all AVDI users with FN017/FN020/FN022 licenses and active AMS.
 
Also, in version 8.9 we have added support for Cluster calibration in analogue dashboards of Jeep Renegade 4xe (Hybrid) and Jeep Compass 4xe (Hybrid).
This functionality is accessible for all AVDI users owning the FN013 license and active AMS.
 
You are now also able to virginise HITAG2 transponders via the Key Learning menu.
And finally, you can read and write the EEPROM of BCM Marelli modules equipped with NEC70F3633 controllers and EEPROM 95320.

Added support for automatic PIN code extraction and key programming by OBDII for a selection of Ferrari models:
• 612
• FF
• 599
• F12
• 458
• California
This will be accessible for FREE via the ABRITES Diagnostics for FCA vehicles for AVDI users with active AMS.

AVDI with active AMS is required.

6.1

With the new update of the ABRITES ECU Programming Tool you will be able to access the following functionalities For Mercedes-Benz VGSNAG3 9G-tronic and VGSNAG2-FDCT gearboxes:
• Read and write PFLASH, MAPS and DFLASH
• Automatic checksum correction when writing a modified PFLASH/MAPS
With the latest updates, we have also added support for CPC/CEPC DELPHI read and program FLASH in Mercedes-Benz and Smart vehicles.
These functionalities are available for all AVDI users who own the EP001 license and active AMS.

With the latest update of the ABRITES Diagnostics for Mercedes-Benz Online you can calibrate the speed limit of Mercedes-Benz eVito vans.
This functionality is available for FREE for all AVDI users with active AMS. No additional licenses required!
General improvements in FBS4 Manager concerning “virgin” functionality and ability for reading and programming of personalization data for ECUs DELPHI CRD3 (both type of ECUs are supported TC1797 and TC1793).
Additional function is now available for quick programming of engine control units with CFF files.

7.8

In the latest update of the ABRITES diagnostics for General Motors we have added support for 2017+ Opel Insignia B mileage recalibration.
This functionality is FREE for all AVDI users who own the ON014 special function and active AMS.

AVDI with active AMS is required.