CB205 - Evinrude Flash Update cable
The CB205 Evinrude Flash Update Cable is designed to be used together with the Evinrude original diagnostic software when working via J2534 Passthru in order to perform the following functionalities: Replace the oil pump EMM...
Buy it nowCB012 - ABRITES CABLE SET FOR DIRECT CAN-BUS CONNECTION
This cable set for direct CAN-BUS connection is a proprietary hardware, designed, developed and produced by ABRITES. It is a universal solution when direct connection to the CAN-BUS network is required. The CB012 needs to be connected between...
Buy it now
CB005 - AVDI cable for ESL (ELV) for Mercedes
This AVDI cable for ESL (ELV) for Mercedes covers all Abrites quality standards, and is used to connect to ESL (ELV) units of different Mercedes models. AVDI Interface...
Buy it nowCB007 - AVDI cable for Bombardier diagnostic connector
The CB007 is а cable used to connect the AVDI interface to the Bombardier diagnostic connector. It covers all ABRITES quality standards and is used to connect the AVDI to BRP vehicles. It includes a fuse and power pinches.
Buy it now
CB008 - AVDI cable for BMW bike diagnostic connector
The CB008 is a cable used to connect the AVDI interface to the BMW bike diagnostic connector. It covers all ABRITES quality standards and is used to establish a connection between the AVDI and the motorcycle.
Buy it nowCB202 - AVDI cable for connection with Suzuki Marine Engines type 2 (round)
This cable is used to connect the AVDI to Suzuki Marine Engines with SUMITOMO 6187-8691 8-Pin Connector when performing diagnostics or other procedures. An AVDI Interface and active...
Buy it now
CB303 - AVDI cable for connection with Benelli Bikes
The CB303 is a cable designed to function as a connector between the AVDI interface and most modern Benelli bikes. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific" diagnostic connector...
Buy it nowCB204 - AVDI cable for connection with Evinrude Marine Engines
The CB204 cable is designed to connect your AVDI to Evinrude engines (E-TEC, Direct injection and FICHT) and is to be used with the Evinrude original diagnostic software when working via J2534 Passthru.
Buy it now
CB305 - AVDI Cable for connection with Harley Davidson bikes (CAN/K-Line)
The CB305 is a cable designed to function as a connector between the AVDI interface and most modern Harley-Davidson bikes. The cable supports motorcycles using K-Line (using the 4-pin connector) and CAN-BUS (using the 6-pin connector). The need for this...
Buy it nowCB003 - AVDI cable for 38 pins round diagnostic connector for MERCEDES
The AVDI cable for the 38 pin round diagnostic connector for Mercedes-Benz vehicles is designed to work with AVDI and older Mercedes models, using this standard. It covers all ABRITES quality standards and is used to establish connection between the AVDI...
Buy it now
CB102 - EXT cable for 25 pin F/M
The CB102 is an extension cable for the 25-pin connector of the AVDI. It is used when the distance between the interface and the vehicle, or another tool in use, for example a Distribution Box, needs to be increased. An
Buy it nowCB103 - OBDII Y cable M/2xF
This OBDII Y cable is used when connecting more than one tool to the OBDII port of the vehicle is required. It has one male and two female OBDII connectors. An AVDI Interface and...
Buy it now
CB002 - AVDI cable for 20 pins round diagnostic connector for BMW
AVDI cable for 20 pins round diagnostic connector for BMW. It is produced by Abrites, covering all quality standards of the company, and converts 20 pins to OBDII, to establish a connection between AVDI and the vehicle. Supported...
Buy it nowCB009 - AVDI cable for connection with trucks Deutsch 6 pin (J1708)
The CB009 is a cable used to connect to trucks equipped with the Deutsch 6 pin (J1708). It covers all ABRITES quality standards and is used to connect the AVDI to all heavy duty models converting the AVDI DB25 connector to the 6 pin Deutsch connector.
Buy it now
CB006 - AVDI cable for instrument cluster Mercedes W203, W209, W211, W219
The CB006 is a cable used to connect Mercedes instrument clusters to the AVDI interface. It covers all ABRITES quality standards and is used to connect to instrument clusters of the listed Mercedes vehicles without having to take them apart.
Buy it nowCB104 - USB A-B Cable
This USB A-B cable is used to connect the AVDI or PROTAG programmer to a laptop. It is a part of the basic AVDI package. An AVDI Interface and active
Buy it now
CB101 - AVDI extension cable for PROTAG
The CB101 AVDI extension cable for ABPROG covers all quality standards of the company, and is used to connect the ZN030 ABPROG programmer to the AVDI unit via their respective DB15...
Buy it nowCB201 - AVDI cable for connection with Suzuki Marine Engines type 1
This cable is used to connect the AVDI to Suzuki Marine Engines with the SUMITOMO 6189-4171 4-Pin Connector when performing diagnostic or other procedures. An AVDI Interface and...
Buy it now
CB203 - AVDI cable for connection with Yamaha Marine Engines
The CB203 cable is designed to connect your AVDI to ALL Yamaha engines up to 2017 and is to be used with the YDS original diagnostic software when working via J2534 Passthru.
Buy it nowCB301 - AVDI cable for connection with Aprilia Bikes
The CB301 is a cable designed to function as a connector between the AVDI interface and most modern Aprilia bikes. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific" diagnostic connector...
Buy it now
CB302 - AVDI cable for connection with KTM Bikes
The CB302 is a cable designed to function as a connector between the AVDI interface and most modern KTM bikes. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific" diagnostic connector rather...
Buy it nowCB304 - AVDI cable for connection with Suzuki Bikes (6 pins)
The CB304 is a cable designed to function as a connector between the AVDI interface and most modern Suzuki bikes using 6-pin connectors. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific"...
Buy it now
CB306 - AVDI Cable for connection with Piaggio bikes
The CB306 is a cable designed to function as a connector between the AVDI interface and most modern Piaggio bikes. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific" diagnostic connector...
Buy it nowCB004 - AVDI cable for 14 pins round diagnostic connector for MERCEDES Sprinter
The CB004 cable is used to connect to all vehicles using the 14-pin round diagnostic connector. Supported vehicles: Mercedes Sprinter up to 2005 Volkswagen LT (Typ 2D) The...
Buy it now
CB011 - ABRITES Mercedes-Benz cable for EZS, 7G Tronic and ISM/DSM
The CB011 cable set is intended for establishing a connection between AVDI and certain modules in Mercedes-Benz vehicles when required. The product is a great addition to the MN026 special function, especially when working with the DAS...
Buy it nowCB010 - ABRITES Star connector cable for FCA
The CB010 cable is used to connect the AVDI interface to the internal CAN-BUS network via the gateway connector of FCA vehicles. The ABRITES Secure Gateway (SGW) bypass adapter cable for FCA vehicles is connected directly to the OBD socket of your diagnostic...
Buy it now
ZN034 - ABPROG flat cable
The ZN034 adapter is used to read VAG BCM2, Renault (X95) BCM modules as well as reading and writing all other modules where a direct connection to the PCB is required. The adapter is used with the...
Buy it nowZN032 - ABPROG NEC adapter with socket
The ZN032 adapter is used for reading, writing and erasing of NEC MCUs from Mercedes-Benz IR-keys without soldering the memory to the adapter. The adapter is used as an add-on to the Abrites
Buy it now
ZN036 - IR AVDI cable
The ZN036 adapter is used for reading data from Mercedes-Benz EIS/EZS through Infra Red. The set consists of ZN045 ABPROG,
Buy it nowZN037 - Renault CAN adapter
The ZN037 adapter is used for diagnostics of all multimedia modules present in ALL Renault vehicles such as Radio, Navigation, Bluetooth, Telephone and others. An AVDI...
Buy it now
ZN039-2 - Toyota Transponder Emulator
The ZN039-2 emulator is used to complete key learning and emergency start procedures for Toyota vehicles up to 2018 with smart systems and DST-AES smart keys. The emulator is used for MASTER key emulation and it...
Buy it nowZN069 - Toyota mechanical key (H-type) adapter set
The ZN069 set is a set of adapters required for key programming of H-type mechanical keys (DST-AES). The set contains the following adapters: ZN067...
Buy it now
ZN033 - NEC MCU adapter
The ZN033 adapter is used for reading, writing and erasing of NEC MCUs from Mercedes-Benz IR-keys by soldering the memory to the adapter, for example in cases when the customer needs to make a NEC IR key virgin. The adapter is used...
Buy it nowZN046 - Key Renewal Adapter
The ZN046 is an adapter for renewing used keys in order for them to be programmed to another vehicle. It is an invaluable tool for all locksmiths, used with the ABPROG programmer. Supported keys: All...
Buy it now
ZN040 - A6/A7/A8 CAN Adapter
The ZN040 adapter is used when performing All Keys Lost procedures for Audi A6/A7/A8 2011+ with BCM2. The adapter provides all necessary connections: CAN separator – used for connection to the internal...
Buy it nowZN054 - Extention cable set for direct CAN connection for VAG
The ZN054 is a cable set used to connect the AVDI directly to the CAN communication of VAG vehicles with extreme ease. Using this cable set, you can either connect to the T6z power steering connector (when available in the vehicle) using...
Buy it now
ZN059 - VAG VDO cluster adapter
This adapter is used to enter service mode for VAG VDO dashboards with a NEC processor and using the UDS protocol. The ZN059 adapter is directly connected to the AVDI and it requires the ZN063...
Buy it nowZN035 - ABPROG eeprom socket
The ZN035 is an Abrites connectivity solution used when reading and writing 8-pin EEPROM memories, such as SPI ST M95xxx memories. The eeprom memory has to be soldered to one of the PCBs together with the included pins and then inserted...
Buy it now
ZN038 - Fiat/Chrysler CAN adapter
The ZN038 adapter allows access to the following FCA (Fiat Chrysler Automobiles) modules: Anti Lock Brakes (ABS) Haptical Lane Feedback (HALF) Electronic Steering Lock (ESL) Occupant Restraint (ORC) Electric...
Buy it nowZN031 - ABPROG EEPROM/BCM adapter
The ZN031 adapter is used for reading, writing and erasing of SPI, Microwire and I2C memories (eeprom) with and without incremental registers. The adapter is used with the Abrites ABPROG...
Buy it now
ZN002 - PROTAG Programmer & TA31
ABRITES hardware products are designed to help users in every automotive related task in their everyday work, or keen enthusiasts, when working on their vehicle. In order to achieve compatibility with a wide variety of vehicle brands, we have...
Buy it nowZN060 - VAG Micronas (new-style connector) cluster adapter
This adapter is used to enter service mode for VAG VDO dashboards with a Micronas processor, the new style connector and TP2.0 protocol. The ZN060 adapter is directly connected to the AVDI and it requires the
Buy it now
ZN052 - Abrites cable set for adapting IMMO parts used together with VN005
The ZN052 cable set is used for adapting immobiliser-related modules in VAG vehicles. It connects the AVDI with Immo III/IV modules in order to successfully exchange them.
Buy it nowCB013 - ECU bench connection cable set
Thе CB013 cable set for bench connection to ECUs is a proprietary hardware, designed, developed and produced by ABRITES. It is required when reading the ISN of ECUs in BMW vehicles on bench, as well as reading the PIN code of the Engine Control Unit in...
Buy it now
ZN051 - Abrites Distribution Box
The Abrites Distribution Box is a proprietary set of cables and pins, allowing the AVDI to connect to different vehicles and modules, with CAN and K-Line protocols. It provides in-vehicle connection options, as well as bench and boot mode....
Buy it nowJ1850 - SAE J1850 adapter for AVDI
The J1850 Adapter will allow special functions operation with SAE J1850- based diagnostic protocols used in the past from Chrysler, Dodge, Jeep, Plymouth, Ford, etc. J1850 is primarily used for key programming among other functions.
Buy it now
ZN062 - 12V/0.5A DC Power adapter
The ZN062 is a 12V/0.5A DC Power adapter used to supply power to the ZN055-EWS3 Adapter for ABPROG as well as any other time you will need to power modules that require up to 0.5A of power.
Buy it nowZN056 - Honda K-Line adapter
The ZN056 Honda K-line adapter is an Abrites product, developed in compliance to the company's high quality standards. It is used between the AVDI interface and CB100 cable to connect to Honda vehicles where the K-Line voltage is 5V and not the standard...
Buy it now
ZN049 - AVDI Adapter for connection with K-Line BMW vehicles (PassThru ONLY)
The ZN049 K-Line adapter is ONLY used when a connection to K-Line BMW vehicles via PassThru is required. When using OEM BMW software via PassThru, the adapter is placed between the AVDI and CB106...
Buy it nowZN061 - VAG Micronas (old-style connector) cluster adapter
This adapter is used to enter service mode for VAG VDO dashboards with a Micronas processor and the old style connector. The ZN061 adapter is directly connected to the AVDI and it requires the ZN063...
Buy it now
ZN055 - ABPROG EWS3 adapter
The ABPROG EWS3 Reader is a proprietary Abrites tool, produced according to the company's high quality standards. This product allows you to read the EWS3 Dump from the EWS3 cars in order to program a key, and it is very useful when...
Buy it nowZN058 - V850E2 adapter for ABPROG
This adapter is used to read V850E2 single-wire microcontrollers using the ABPROG programmer. This adapter is exclusively used with the ZN030 ABPROG programmer and is not a standalone...
Buy it now
ZN066 - Subaru transponder emulator
The ZN066 is a tool devised to work in Subaru H type bladed (mechanical) keys for Subaru vehicles in ALL KEYS LOST situations. The device is perfect for customers who do not have a PROTAG as it connects directly to your AVDI to emulate...
Buy it nowZN063 - 12V/1A DC Power adapter
The ZN063 is a 12V/1A DC Power adapter used to supply power to the following products: ZN059 - VAG VDO Cluster Adapter ZN060 - VAG Micronas (new style connector) Cluster Adapter It can also be used...
Buy it now
ZN048 - Field Detector Universal Key 125/20 kHz
The ZN048 - Field Detector Universal Key 125/20 kHz is an Abrites universal field detector, developed to confirm whether the electronic ignition coil is functional before starting work. It is capable of detecting a field of...
Buy it nowZN065 - PWM voltage converter (for ZN051 Distribution Box ver. 2.3)
The ZN065 adapter is an add-on to the ZN051 Distribution box version 2.3 connecting to the DB15 port of the Distribution Box. In essense the ZN065 upgrades the Abrites Distribution box from version 2.3 of the hardware to version 2.4 as it adds a PWM voltage...
Buy it now
ZN057 - EEPROM wire extender for ABPROG EEPROM/BCM adapter
This is a wire extender for the ZN031 - ABPROG EEPROM/BCM adapter, used to read chips without removing them from the PCB in tasks such as reading the EEPROM of the FEM/BDC module in BMW F-series...
Buy it nowZN053 - AVDI Extractor Cable
The ZN053 extractor cable allows key programming for Immo III/IV vehicles with Megamos 48 transponders without disassembling the dashboard. It is used together with the ZN051...
Buy it now
ZN047 - Field Detector Renault card 125 kHz
The ZN047 Field Detector Renault card 125 kHz is an Abrites Renault key card type field detector, developed to confirm whether the electronic ignition coil is functional before starting work. This field detector provides...
Buy it nowZN072 - ABRITES cable set for Tesla Model S/X and Model 3
The ZN072 is a cable set designed, developed and produced by Abrites to be used together with the Abrites Diagnostics for Tesla vehicles. This set contains two diagnostic cables; one for the Tesla Model X/S (the ZN071 cable) and one for the Model 3 (the...
Buy it now
ZN073 - BDM Programmer
The ZN073 BDM Programmer is an adapter that is connected to the ZN030 ABPROG Programmer and cannot be used individually. It allows reading/writing of PFlash and DFlash of EDC16XX, MED9.X and other ECUs on bench. Currently, the following MCU...
Buy it nowZN074 - ECU reading set
The ZN074 set is developed and designed by the Abrites Team to aid you in ECU reading and writing procedures on bench. It is designed to work together with ZN051 Distribution Box and cannot be used individually. The ZN074 works great with...
Buy it now
ZN030 - MCU programmer type 3 with ext. cable
The ZN030 ABPROG Programmer is a set of devices, designed to assist with many procedures, which require work on bench with multiple units. With the help of the ABPROG programmer and its additional adapters you can expect the following:
Buy it nowCB106 - AVDI OBDII cable (SAE J1962)
This cable is a proprietary ABRITES hardware, essential part of the basic AVDI diagnostic package. It is used to connect the AVDI to the OBD port of the vehicle. The cable is suitable for connecting AVDI to cars, trucks,...
Buy it now
CB016 - BCM2 connection cable
The latest ABRITES connectivity solution, the CB016, is a cable set used to establish a connection between AVDI, ABPROG and BCM2 modules in order to read and access (unlock) locked BCM2 modules on bench. This allows key programming procedures...
Buy it now
ABRITES STARTER PACKAGE
The ABRITES Vehicle Diagnostics Interface (AVDI) is the latest version of our interface that allows the connection between our state-of-the-art software and your vehicles. AVDI is the basis upon which the whole ABRITES products ecosystem...
Buy it nowCB101 - AVDI extension cable for PROTAG
The CB101 AVDI extension cable for ABPROG covers all quality standards of the company, and is used to connect the ZN030 ABPROG programmer to the AVDI unit via their respective DB15...
Buy it now
CB102 - EXT cable for 25 pin F/M
The CB102 is an extension cable for the 25-pin connector of the AVDI. It is used when the distance between the interface and the vehicle, or another tool in use, for example a Distribution Box, needs to be increased. An
Buy it nowCB103 - OBDII Y cable M/2xF
This OBDII Y cable is used when connecting more than one tool to the OBDII port of the vehicle is required. It has one male and two female OBDII connectors. An AVDI Interface and...
Buy it now
CB104 - USB A-B Cable
This USB A-B cable is used to connect the AVDI or PROTAG programmer to a laptop. It is a part of the basic AVDI package. An AVDI Interface and active
Buy it nowABRITES STARTER PACKAGE
The ABRITES Vehicle Diagnostics Interface (AVDI) is the latest version of our interface that allows the connection between our state-of-the-art software and your vehicles. AVDI is the basis upon which the whole ABRITES products ecosystem...
Buy it nowCB201 - AVDI cable for connection with Suzuki Marine Engines type 1
This cable is used to connect the AVDI to Suzuki Marine Engines with the SUMITOMO 6189-4171 4-Pin Connector when performing diagnostic or other procedures. An AVDI Interface and...
Buy it now
CB202 - AVDI cable for connection with Suzuki Marine Engines type 2 (round)
This cable is used to connect the AVDI to Suzuki Marine Engines with SUMITOMO 6187-8691 8-Pin Connector when performing diagnostics or other procedures. An AVDI Interface and active...
Buy it nowCB204 - AVDI cable for connection with Evinrude Marine Engines
The CB204 cable is designed to connect your AVDI to Evinrude engines (E-TEC, Direct injection and FICHT) and is to be used with the Evinrude original diagnostic software when working via J2534 Passthru.
Buy it now
CB205 - Evinrude Flash Update cable
The CB205 Evinrude Flash Update Cable is designed to be used together with the Evinrude original diagnostic software when working via J2534 Passthru in order to perform the following functionalities: Replace the oil pump EMM...
Buy it nowCB203 - AVDI cable for connection with Yamaha Marine Engines
The CB203 cable is designed to connect your AVDI to ALL Yamaha engines up to 2017 and is to be used with the YDS original diagnostic software when working via J2534 Passthru.
Buy it now
ABRITES STARTER PACKAGE
The ABRITES Vehicle Diagnostics Interface (AVDI) is the latest version of our interface that allows the connection between our state-of-the-art software and your vehicles. AVDI is the basis upon which the whole ABRITES products ecosystem...
Buy it nowBK002 - Advanced bike diagnostics, BMW bikes key programming
The BK002 is one of a kind product for key programming and diagnostics for various motorcycles, bikes, scooters, snowmobiles, watercrafts, and ATVs, allowing key programming and performi diagnostics from the diagnostic port of the vehicle. Here are...
Buy it now
CB304 - AVDI cable for connection with Suzuki Bikes (6 pins)
The CB304 is a cable designed to function as a connector between the AVDI interface and most modern Suzuki bikes using 6-pin connectors. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific"...
Buy it nowCB306 - AVDI Cable for connection with Piaggio bikes
The CB306 is a cable designed to function as a connector between the AVDI interface and most modern Piaggio bikes. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific" diagnostic connector...
Buy it now
