BN011 - Immobiliser parts synchronisation

BN011 - Immobiliser parts synchronisation

SKU: BN011
Category BMW/MINI
€900.00
BN011 - Electronic Gearbox System synchronization
Requirements AMS I18

The BN011 is a function dedicated to the adaptation of transmission control units to the EWS (Electronische Wegfahrsperre or electronic immobilizer system), commonly known as EGS (Electronic Gearbox Computer or Elektronische Getriebesteuerung) via OBDII. The ability to synchronize an EGS to a vehicle is used not only when adapting a new or used module to a vehicle, but also in some cases of key programming or replacing other modules which participate in the vehicle's drivetrain or security system. BN011 also allows the adaptation of Bosch MG/MD ECUs in G-series vehicles by DFlash dump. 


Main functionalities:

  • ZF6HP EGS adaptation to E-Series vehicles
  • ZF8HP EGS adaptation to E-Series vehicles
  • ( DME/ DDE of the donor car (donor of EGS) or dump from the DME/ DDE (Digitale Motor Elektronik /Digitale Diesel Elektronik)of the donor car is needed in the cases where an 8HP transmission is installed in an E-Series vehicle)
  • ZF8HP EGS adaptation to F-Series vehicles
  • BOSCH MG/MD adaptation to G-series vehicles (by dump)


Supported models and ECUs:

  • All BMW E-Series vehicles
  • All BMW F-Series vehicles
  • All Bosch MG/MD ECUs in G-Series by DFlash dump


BN012 is required for adaptation of 6-speed gearboxes in E-series vehicles if no working key is present or a ZN002 PROTAG programmer if a working key is present.
An AVDI and active AMS are needed for purchasing this license.

  • All BMW E-Series vehicles
  • All BMW F-Series vehicles
BMW/Mini (Online) User Manual

2015 BMW F10 (CAS4 )All Keys Lost- Key programming with AVDI

Hello Friends,I had the chance to work on a 2015 BMW F10 equipped with a CAS4 immobilizer. The owner had lost all keys. I managed to program a new key and st...