| Requirements | AMS | I18 |
|---|
This special function supports various Renault/Dacia/Samsung and the cross platform Nissan vehicles, equipped with Johnson Control (Visteon) or VDO (Continental) dashboards, with ATE ABS/ESC. Using the RR016 you can do the following:
- Cluster calibration
- Reading and updating internal control module configuration memory by diagnostics
- Mileage calibration in BOTH the instrument cluster and ABS/ESC WITHOUT REFLASHING
- NO re-flashing is required, the procedure will take only a few minutes, making it QUICKER AND SAFER for the user.
Supported models:
- Clio/Kango/Megane with HC908 JAEGER by dash connector
- Clio II
- Clio III
- Scenic/Modus
- Megane II
- Megane III/Fluence
- Laguna III
- Kangoo
- Master III
- Logan II/Sandero II/Lodgy/Dokker
- Clio IV/Captur
- Talisman, Megane IV, Scenic IV, Espace V, Kadjar
- Master III Ph2 2019+ (IC by OBD and DAB by dump)
N.B. Please note that you will require an AVDI interface with an active AMS in order to use this special function.
Update from RR009 to RR016
€400.00 (Excl. VAT)Supported models:
- Clio/Kango/Megane with HC908 JAEGER by dash connector
- Clio II
- Clio III
- Scenic/Modus
- Megane II
- Megane III/Fluence
- Laguna III
- Kangoo
- Master III
- Logan II/Sandero II/Lodgy/Dokker
- Clio IV/Captur
- Talisman, Megane IV, Scenic IV, Espace V, Kadjar
- Master III Ph2 2019+ (IC by OBD and DAB by dump)