-
-20%
VAG FULL V14
The VAG Full package latest version includes twelve specialised automotive solutions for the VAG professional. If you are mostly working on vehicles from the group and need a reliable set of functionalities, the VAG Full is ideal for you!
Main Functionalities:
- Key Programming
- Module Replacement
- Component Protection functionalities
- Advanced Diagnostics (including MMI configurations)
- Reading Component Security Bytes from Locked BCM2 Modules
- Mileage recalibration
Full list of solutions:
- VN002 - Parts Adaptation Special Function
- VN003 - Key Learning Special Function
- VN005 - Immo III/IV emulation
- VN006 - Immo III/IV Megamos 48 Key Programming
- VN007 - Mileage recalibration for MQB vehicles
- VN009 - Key programming for MQB vehicles
- VN012 - Security data extraction for VAG vehicles with Magneti Marelli 9GV ECU
- VN013 - ECU authorization for all Immo 3 and Immo 4 vehicles
- VN015 - Odometer (incl. A6/A7/A8/TOUAREG 2010-2017, without MQB)
- VN017 - Component Protection Manager
- VN018 - Advanced Diagnostics for VAG Vehicles
- VN020 - CS Manager for locked BCM2 modules
With the VAG Full package you are able to program keys for a wide range of models of the group with different Immobilisers, extract security data, access Component Protection functionalities in order to replace modules or program keys.
With the VN002 Parts Adaptation solution you can replace immobiliser data related modules, as well as Component Protection Generation 1 and 2 modules. Modules include Engine Control Units (ECUs), Transmission Control Units (TCUs), Immobiliser, Electronic Steering Lock (ESL), dashboard. Other solutions related to parts adaptation are the VN005, VN013, VN017. Replacement of all component protection-related modules (if both the donor and host gateways are present) is made possible with the VN017 solution. The VN017 allows replacing the dashboard, Climatronic and infotainment system by OBDII. With this solution you can read and update component protection bytes of Lear Gateway.
The key programming functionalities are presented by the VN003, VN006, VN009, VN012, VN020. Our latest solution - the VN020 allows reading Component Security bytes from locked BCM2 modules, which makes All Keys Lost and spare key programming possible for a variety of Audi and Touareg models.
Advanced diagnostics, such as MMI configurations, Long coding and adaptations are accessible via the VN018 solution. All these procedures are super user-friendly because of the coding helper available during working. The coding helper gives information about the meaning of every single byte of the coding allowing you to make the necessary changes to the module without the need for guesswork.
Mileage calibration is accessible via the VN007 solution, which allows the recalibration of VDO/Continental dashboard in MQB vehicles. The VN015, on the other hand, is intended for calibration of the mileage in VAG vehicles from 1995 up to 2016 such as Audi A4/A5/A6/A7/A8 as well as many others part of the VAG group.
Get the VAG Full package and make your daily work with VAG vehicles effective and quick!
We also recommend getting the Abrites Support Plan Service in order to receive timely technical advice and help from our team of professionals.
Please, refer to the Abrites Diagnostics for VAG Online User Manual for more information.
All Abrites software products require the use of AVDI and active AMS.
Vehicles of the VAG group
VN004 - EDC17/MED17 Boot Mode Reading
VN009 - Key programming for MQB vehicles
VN017 - Component protection manager
VN010 - Mileage recalibration for Audi A6/A7...
VN005 - Immo III/IV emulation
VN007 - Mileage recalibration for MQB vehicles
VN006 - Immo III/IV Megamos 48 Key Programming
VN018 - Advanced diagnostics for VAG vehicles
VN020 - CS Manager for locked BCM2 modules
VN012 - Security data extraction for VAG...
VN013 - ECU authorization for all Immo 3...
Component Protection Manager (generation...
Transmission A4/S4/RS4/A5/S5/RS5/Q5 2007+...
BCM2 Key Programming by Diagnostic
ECU Component Security Data
ECU Adaptation by Diagnostic
ECU Advanced Diagnostic Functionality
Immobilizer Data Configuration Instrument...
Airbag Control Module - Advanced Diagnostic...
EDC17/MED17 Direct PIN/CS
Read Simos PCR 2.1 engine control units
Key Adaptation and Programming
BCM2 All keys lost (A6/A7/A8)
Instrument Cluster/Engine Control Module...
VAG FULL V14
VN003 - Key Learning Special Function
VN002 - Parts Adaptation Special Function
VN015 - Odometer (incl. A6/A7/A8/Touareg...
VN001 - MILEAGE CALIBRATION SPECIAL FUNCTION
VW Golf VII DSG TCU replacement and adaptation using AVDI
MQB transmission control units replacement and adaptation is now possible, I got an update that I could use to adapt a used DSG TCU to a Golf VII. The car you see on the video needed to have the TCU adapted and the procedure is quite easy to be followed once you get to understand how the software works. What I need for the operation is the authorization CS for the TCU which I read from a working key. For this type of procedure, I had to reactivate my AMS as it had expired and the software needs to be connected to the server for the calculations to happen.